AFCT-5805AZ Avago Technologies US Inc., AFCT-5805AZ Datasheet - Page 4

• Manufacturer Part Number: AFCT-5805AZ
• Description: TXRX OPT SM 155MBS SONET OC3/SDH
• Manufacturer: Avago Technologies US Inc.
• Series: -r

Specifications of AFCT-5805AZ

• Data Rate: 155Mbps
• Wavelength: 1300nm
• Applications: General Purpose
• Voltage - Supply: *
• Connector Type: SC
• Mounting Type: Through Hole
• Function: High performance module for serial optical data communications applications, for ATM, SONET OC-3/SDH STM-1.
• Product: Transceiver
• Maximum Rise Time: 2 ns/2.2 ns
• Maximum Fall Time: 2 ns/2.2 ns
• Operating Supply Voltage: 3.1 V to 5.25 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: Singlemode Glass
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Evaluation Circuit Boards
Evaluation circuit boards are available from Avago Tech-
nologies Application Engineering staff. Contact your local
Avago Technologies sales representative to arrange for
access to one if needed.
Recommended Solder Fluxes and Cleaning/Degreasing
Chemicals
Solder fluxes used with the AFCT-5805xxZ fiber-optic
transceiver should be water-soluble, organic solder flux-
es. Some recommended solder fluxes are Lonco 3355-11
from London Chemical West, Inc. of Burbank, CA, and 100
Flux from Alpha Metals of Jersey City, NJ.
Recommended cleaning and degreasing chemicals for the
AFCT-5805xxZ are alcohol’s (methyl, isopropyl, isobutyl), ali-
phatics (hexane, heptane) and other chemicals, such as soap
solution or naphtha. Do not use partially halogenated hy-
drocarbons for cleaning/degreasing. Examples of chemicals
to avoid are 1.1.1. trichloroethane, ketones (such as MEK),
acetone, chloroform, ethyl acetate, methylene dichloride,
phenol, methylene chloride or N-methylpyrrolidone.
Figure 4. Recommended Board Layout Hole Pattern
(0.800)

20.32
(0.100)
2.54
(0.800)
20.32
TOP VIEW
DIMENSIONS ARE IN MILLIMETERS (INCHES)
(0.075 ± 0.004)
2 x Ø 1.9 ± 0.1
(0.032 ± 0.004)
9 x Ø 0.8 ± 0.1
Recommended Solder and Wash Process
The AFCT-5805xxZ is compatible with industry standard
wave or hand solder processes.
A drying cycle must be completed after wash process to
remove all moisture from the module.
AFCT-5805xxZ Process Plug
The AFCT-5805xxZ transceiver is supplied with a process
plug for protection of the optical ports with the Duplex
SC connector receptacle. This process plug prevents con-
tamination during wave solder and aqueous rinse as well
as during handling, shipping or storage. Each process
plug can only be used once during processing, although
with subsequent use, it can be used as a dust cover. It is
made of high-temperature, molded, sealing material that
will withstand +85°C and a rinse pressure of 110 lb/in
2
.