FPS100048 TDK Corporation, FPS100048 Datasheet - Page 45

• Manufacturer Part Number: FPS100048
• Description: PWR SUP FNT END 48V 1008W 21A
• Manufacturer: TDK Corporation
• Series: FPSr
• Type: Commercialr

Specifications of FPS100048

• Power Supply Type: Switching (Closed Frame)
• Voltage - Output: 48V
• Number Of Outputs: 1
• Power (watts): 1000W
• Applications: Commercial
• Voltage - Input: 85 ~ 265VAC
• Mounting Type: Chassis Mount
• 1st Output: 48 VDC @ 21A
• Size / Dimension: 1.61" L x 5" W x 11.4" H (40.9mm x 127mm x 289.6mm)
• Power (watts) - Rated: 1008W
• Operating Temperature: 0°C ~ 70°C
• Efficiency: 88%
• Approvals: CE, EN, UL
• Line Regulation: 0.4%
• Load Regulation: 0.8%
• Power Supply Output Type: Fixed
• No. Of Outputs: 1
• Output Voltage: 48V
• Output Current: 21A
• Power Rating: 1kW
• Input Voltage: 85V AC To 265V AC / 120V DC To 360V DC
• Maximum Output Current: 21 A
• Maximum Output Power: 1008 W
• Input Frequency: 47 to 63 Hz
• Brand/series: FPS1000 Series
• Configuration: Enclosed
• Operation: Linear
• Output: 48 VDC @ 21 A
• Power, Output: 1008 W
• Primary Type: AC-DC
• Special Features: High Efficiency, Hot Swappable, PFC, Remote On/Off, Remote Sense
• Voltage, Input: 85 to 265/120 to 360 VAC/VDC
• Voltage, Output: 48 VDC
• Output Current (max): 21A
• Screening Level: Commercial
• Product Depth (mm): 127mm
• Operating Temperature Min Deg. C: 0C
• Operating Temperature Max Deg. C: 70C
• Mounting Style: Screw
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 285-1239

17.7.3 Making the load connections
wires for load connection at the FPS-T1U.
17.7.4 Rear panel description
Fig. 17-1: FPS-T1U Rear panel
1. Mounting brackets. Use M6x12 screws to fix the FPS-T1U to the rack.
2. Output voltage terminals rugged busbars. Use M5x12 screws for load wires recommended
3. Micro-Fit 3.0
4. Ground stud M4 (three place).
5. IEC320 AC inlet ,shown for FPS-T1U. For FPS-T1U/P there are no IEC320 inlets on the rack.
The load wires should be properly terminated with terminals securely attached. DO NOT use unterminated
1
Tightening torque 24~31 Kgf.cm.
2
TM
Module C
Dual Row Right Angle 16pins (Molex) connector for control and monitoring signals.
3
Hazardous voltages may exist at the outputs and the load connections
when using a power supply with a rated output greater than 40V. To
protect personnel against accidental contact with hazardous voltages,
ensure that the load and it's connections has no accessible live parts.
Ensure that the load wiring insulation rating is greater than or equal to
the maximum output voltage of the power supply.
4
5
Module B
!
42
WARNING
Module A
1