TL100048 TDK Corporation, TL100048 Datasheet - Page 17

• Manufacturer Part Number: TL100048
• Description: PWR SUP FNT END 48V 1000W 20A
• Manufacturer: TDK Corporation
• Series: TLr

Specifications of TL100048

• Power Supply Type: Switching (Closed Frame)
• Voltage - Output: 48V
• Number Of Outputs: 1
• Power (watts): 1000W
• Applications: Commercial
• Voltage - Input: 90 ~ 264VAC
• Mounting Type: Chassis Mount
• 1st Output: 48 VDC @ 20A
• Size / Dimension: 11.12" L x 3.41" W x 3.45" H (282.4mm x 86.6mm x 87.6mm)
• Power (watts) - Rated: 1000W
• Operating Temperature: -40°C ~ 65°C
• Efficiency: 92%
• Approvals: CE, CSA, EN, UL
• Line Regulation: ±1%
• Load Regulation: ±1%
• Power Supply Output Type: Fixed
• No. Of Outputs: 1
• Output Voltage: 48V
• Output Current: 20A
• Power Rating: 1000W
• Input Voltage: 90V AC To 264V AC
• Length: 282.448mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 285-1646

After removing DC Power Plant from boxes and packing material, inspect for shipping and/or
other damage. Have all tools, wire, cables, hardware, etc., within easy reach. To the extent pos-
sible ensure a clean (free of debris, dust, foreign material, etc.) work environment. Ensure all AC
and DC power sources are off and disconnected.
This equipment is intended for normal operations and is to be installed in a standard 19" enclo-
sure. It is recommended that one person lift the rack into place while another installs supplied
mounting hardware. Torque mounting hardware according to Table 11. A gap of a minimum of
¾ inch above and below the system is required for proper airflow. We recommend that you use
at least two screws per bracket.
For systems using AC power cords, knockouts are provided to route AC cables to the proper con-
nections on the single and dual feed shelves. Remove the cutout and place the provided cord
grip in the knockout to provide protection and security to the AC cord. Otherwise use conduit to
run your AC wires to the system.
3055 Del Sol Blvd • San Diego, CA 92154 • 1-800-LAMBDA-4
4 Site and Equipment Preparation
5 Power Plant Mounting and Wiring
5.1 Mechanical mounting
5.2 AC input
Mounting Brackets
Figure 5 - Front View
TLR5-S S ERIES POWER SYSTEM
Revision 1 : January 2006
Page. 17