TLRBP TDK Corporation, TLRBP Datasheet - Page 17

• Manufacturer Part Number: TLRBP
• Description: BLANKING PANEL
• Manufacturer: TDK Corporation
• Series: TLr

Specifications of TLRBP

• Accessory Type: Blank Panel
• For Use With: 285-1646 - PWR SUP FNT END 48V 1000W 20A285-1645 - PWR SUP FNT END 24V 1000W 40A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: TL Series
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 285-1648

After removing DC Power Plant from boxes and packing material, inspect for shipping and/or
other damage. Have all tools, wire, cables, hardware, etc., within easy reach. To the extent pos-
sible ensure a clean (free of debris, dust, foreign material, etc.) work environment. Ensure all AC
and DC power sources are off and disconnected.
This equipment is intended for normal operations and is to be installed in a standard 19" enclo-
sure. It is recommended that one person lift the rack into place while another installs supplied
mounting hardware. Torque mounting hardware according to Table 11. A gap of a minimum of
¾ inch above and below the system is required for proper airflow. We recommend that you use
at least two screws per bracket.
For systems using AC power cords, knockouts are provided to route AC cables to the proper con-
nections on the single and dual feed shelves. Remove the cutout and place the provided cord
grip in the knockout to provide protection and security to the AC cord. Otherwise use conduit to
run your AC wires to the system.
3055 Del Sol Blvd • San Diego, CA 92154 • 1-800-LAMBDA-4
4 Site and Equipment Preparation
5 Power Plant Mounting and Wiring
5.1 Mechanical mounting
5.2 AC input
Mounting Brackets
Figure 5 - Front View
TLR5-S S ERIES POWER SYSTEM
Revision 1 : January 2006
Page. 17