101-0391 Rabbit Semiconductor, 101-0391 Datasheet - Page 138

• Manufacturer Part Number: 101-0391
• Description: CARD DIGITAL IO 8/8 SNKNG SR9220
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0391

• Accessory Type: Smart Star Digital I/O Card
• For Use With/related Products: SR9220
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

3. Fasten the unit with the four 4-40 screws and washers included with the LCD/keypad
138
module. If your panel is thick, use a 4-40 screw that is approximately 3/16" (5 mm)
longer than the thickness of the panel.
Carefully tighten the screws until the gasket is compressed and the plastic bezel face-
plate is touching the panel.
Do not tighten each screw fully before moving on to the next screw. Apply only one or
two turns to each screw in sequence until all are tightened manually as far as they can
be so that the gasket is compressed and the plastic bezel faceplate is touching the panel.
Figure B-8. LCD/Keypad Module Mounted in Panel (rear view)
Smart Star (SR9000)