101-0391 Rabbit Semiconductor, 101-0391 Datasheet - Page 83

• Manufacturer Part Number: 101-0391
• Description: CARD DIGITAL IO 8/8 SNKNG SR9220
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0391

• Accessory Type: Smart Star Digital I/O Card
• For Use With/related Products: SR9220
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Table 13 lists the electrical, mechanical, and environmental specifications for the Digital
I/O Card.
User’s Manual
Board Size
Connectors
Operating Temperature
Humidity
Power Requirements
Digital Inputs
Digital Outputs
Parameter
Table 13. Digital I/O Card Specifications
2.73" × 3.00" × 0.44"
(70 mm × 76 mm × 11 mm)
one 2 × 17 latch/eject ribbon connector, 0.1 inch pitch
–40°C to +70°C
5% to 95%, noncondensing
5 V DC at 65 mA from backplane (+5 V supply)
9 V to 30 V DC for +RAW/+V_USER from backplane or 9 V
to 30 V DC for K on user interface header J2
Maximum draw 2.0 A from +RAW/+V_USER on backplane
Continuous operation from -30 V to +30 V, logic threshold at
2.5 V, protected against spikes ±48 V, 10 kΩ pull-up/pull-down
resistors
Each output can sink (source) up to 200 mA continuously with
load limit of 40 V, each output may be switched independently
or bank of eight may be switched all at once, load current
supplied from +RAW/+V_USER on backplane or user-
supplied K on user interface header J2
Specification
83