AT90USBKEY2 Atmel, AT90USBKEY2 Datasheet - Page 14

• Manufacturer Part Number: AT90USBKEY2
• Description: KIT DEMO FOR AT90USB
• Manufacturer: Atmel

Specifications of AT90USBKEY2

• Main Purpose: USB Controller
• Embedded: *
• Utilized Ic / Part: AT90USB1286, AT90USB1287, AT90USB646, AT90USB647
• Primary Attributes: *
• Secondary Attributes: *
• Supplier: Atmel
• Architecture: 8/16-bit
• Interfaces: USB
• For Use With: ATSTK525 - KIT STARTER FOR AT90USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: AT90USBKEY; AT90USBKEY

7627A–AVR–04/06
Using the AT90USBKey
2.6
2.6.1
2-14
Debugging
Debugging with AVR JTAG ICE mkII
Figure 2-10 . Connecting AVR JTAG ICE to AVRUSBKey
The Flash, EEPROM and all Fuse and Lock Bit options ISP-programmable can be
programmed individually or with the sequential automatic programming option.
Note:
The AT90USBKey can be used for debugging with JTAG ICE MK II.
Connect the JTAG ICE mkII as shown in Figure 2-10, for debugging, please refer to
AVR Studio® Help information.
When using JTAG ICE MK II for debugging, and as AT90USB parts are factory
configured with the higher security level set, a chip erase operation will be performed on
the part before debugging. Thus the on-chip flash bootloader will be erased. It can be
restored after the debug session using the bootloader hex file available from ATMEL
website.
See AVR Studio® on-line Help for information.
AT90USBKey Hardware User Guide