DV251001 Microchip Technology, DV251001 Datasheet - Page 11

• Manufacturer Part Number: DV251001
• Description: KIT DEVELOPMENT CAN MCP2510
• Manufacturer: Microchip Technology

Specifications of DV251001

• Main Purpose: Interface, CAN Controller
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: MCP2510, MCP2515
• Primary Attributes: Stand alone CAN Controller with SPI
• Silicon Manufacturer: Microchip
• Application Sub Type: CAN
• Kit Application Type: Interface
• Silicon Core Number: MCP2510, MCP2515
• Kit Contents: Board Cable Power Supply CD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Secondary Attributes: -
• Lead Free Status / RoHS Status: na, Lead free / RoHS Compliant
• Other names: DV251001R; DV251001R

2.4
2.5
 2003 Microchip Technology Inc.
INSTALLING THE HARDWARE
INSTALLING THE SOFTWARE
2.4.1
The target board is connected to the PC via the provided 25-pin parallel cable (a stan-
dard male-to-male DB25 cable). LPT addresses supported are 0x3BC, 0x378 and
0x278.
Power to the target board is supplied by the included 9V power adapter.
2.4.2
There are two DB9 connectors:
One is a RS-232 interface for connecting to the PC as applications permit. This con-
nector is connected to node 1 and is typically used during PICmicro MCU development
to assist the user designing and/or debugging (e.g., it may be used to print register
and/or receive buffer contents to the PC screen for debugging).
The other connector is a CAN bus interface that can be used to connect the board to
an existing CAN bus. The pinout for this connector follows the defacto standard
recommended pinout of pin 7 = CANH and pin 2 = CANL.
FIGURE 2-2:
Insert the CD into the PC. Click the Start button and select Run. Enter the path to the
file wc32n.exe or select Browse and find the file. Alternate method: Through Win-
dows Explorer
the software program.
Note:
Required
Optional
If installing on a Windows NT/2000/XP platform, third party drivers must be
installed to allow I/O access to the parallel port. Refer to Section 1.6 “Host
Computer System Requirements”.
®
, run the file named wc32n.exe. Follow the instructions for installing
DB9 CAN BUS CONNECTOR
Not Connected
Not Connected
In Use
CANH
6
7
8
9
1
2
3
4
5
Not Connected
CANL
In Use
In Use
Not Connected
DS51416A-page 7