STEVAL-ISF002V1 STMicroelectronics, STEVAL-ISF002V1 Datasheet - Page 6

• Manufacturer Part Number: STEVAL-ISF002V1
• Description: BOARD EVALUATION
• Manufacturer: STMicroelectronics

Specifications of STEVAL-ISF002V1

• Main Purpose: *
• Embedded: *
• Utilized Ic / Part: *
• Primary Attributes: *
• Secondary Attributes: *
• Product: Power Management Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-10422

Safety and operating instructions
1
1.1
1.2
1.3
6/62
Safety and operating instructions
General
During assembly and operation, the PFC power board poses several inherent hazards,
including bare wires, moving or rotating parts, and hot surfaces. Serious personal injury and
damage to property may be caused if it is used or installed incorrectly.
All operations involving transportation, installation and use, as well as maintenance, should
be carried out by skilled technical personnel (national accident prevention rules must be
observed). For the purpose of these basic safety instructions, "skilled technical personnel"
refers to suitably qualified people who are familiar with the installation, use and maintenance
of power electronic systems.
This board must be used in a power laboratory only, and under protection, by engineers and
technicians who are experienced in power electronics technology.
STMicroelectronics will not be held responsible for damage caused to objects or persons.
Intended use of the demonstration board
The entire system is designed for demonstration purposes only, and shall not be used for
electrical installation or machinery. The technical data as well as information concerning the
supply conditions shall be taken from the documentation and strictly observed.
Installation of the demonstration board
The installation and cooling of the whole system must be in accordance with the
specifications and targeted application.
●
●
●
Excessive strain on the board must be avoided. In particular, no components are to be
bent, or isolating distances altered, during the course of transportation or handling.
No contact must be made with electronic components and contacts.
The boards contain electro-statically sensitive components that are prone to damage
through improper use. The electrical components must not be mechanically damaged
or destroyed (to avoid potential health risks).
Warning:
Many sources of serious hazard are present on this board.
The board operates directly from the mains, is not galvanic
insulated, and provides high voltage DC levels at the output
that can cause serious electric shocks, serious burns and
death. Hot surfaces that can cause burns are present on the
board.
Doc ID 16854 Rev 1
UM0877