MCP215X/40EV-DB Microchip Technology, MCP215X/40EV-DB Datasheet - Page 47

• Manufacturer Part Number: MCP215X/40EV-DB
• Description: BOARD DEMO FOR MCP215X/40
• Manufacturer: Microchip Technology

Specifications of MCP215X/40EV-DB

• Main Purpose: Interface, IrDA
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: MCP2150, MCP2155, MCP2140
• Primary Attributes: PICDEM™ Demo Board Interface
• Processor To Be Evaluated: MCP21x
• Interface Type: UART
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Secondary Attributes: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

C.1
TABLE C-1:
C.2
© 2006 Microchip Technology Inc.
JP2:JP1 JP3:JP4 JP5
Legend: O = Jumper is “Open”
Baud
Rate
O:O
S:S
S:S
INTRODUCTION
WHAT IS TESTED
1-2 = Pin 1 is shorted to Pin 2 (of 3 pin header)
2-3 = Pin 2 is shorted to Pin 3 (of 3 pin header)
Mode
O:O
O:S
S:S
MCP215X/40 DEVELOPER’S DAUGHTER BOARD TESTED CONFIGURATIONS
EN
The MCP215X/40 Developer’s Daughter Board can be used in multiple configurations.
Only a subset of these configurations will be tested. The tests were performed at 9600
baud. Other baud rates are not tested.
The following portions of the board are tested:
• MCP2150
• TFDU-4300 (U5) and circuitry
• Header 1 – TXD and RXD signals
• Header 2 – TX2 and RX2 signals
• Y1 circuitry (11.0592 MHz)
• JP3, JP4, JP6, and JP7
• JMP1 (P2 – P3)
• JMP2 (P2 – P3)
• JMP3 (P1 – P2)
• JMP4 (P1 – P2)
• JMP5 (P2 – P3)
• JMP6 (P2 – P3)
O
O
O
JMP1,
JMP2,
JMP3,
JMP4
2-3,
2-3,
1-2,
2-3,
2-3,
1-2,
2-3,
2-3,
1-2,
1-2
1-2
1-2
Appendix C. Board Testing
MCP215x/40 RX/TX Destination
DAUGHTER BOARD USER’S GUIDE
2-3 (JMP5)
2-3 (JMP5)
JMP5/JP6
S (JP6)
RX
S = Jumper is “Shorted”
MCP215X/40 DEVELOPER’S
2-3 (JMP6)
2-3 (JMP6)
JMP6/JP7
S (JP7)
TX
JP8:JP9
O:O
O:O
O:O
9600 baud, MCP2150 to
PIC18F8772 UART2 on Header 2
(250 byte transfer)
9600 baud, MCP2150 to
PIC18F8772 UART2 on Header 2
(Echo mode)
9600 baud, MCP2150 to DB9
(PC) on Header 1
Comment
DS51591A-page 43