MCP215X/40EV-DB Microchip Technology, MCP215X/40EV-DB Datasheet - Page 68

• Manufacturer Part Number: MCP215X/40EV-DB
• Description: BOARD DEMO FOR MCP215X/40
• Manufacturer: Microchip Technology

Specifications of MCP215X/40EV-DB

• Main Purpose: Interface, IrDA
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: MCP2150, MCP2155, MCP2140
• Primary Attributes: PICDEM™ Demo Board Interface
• Processor To Be Evaluated: MCP21x
• Interface Type: UART
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Secondary Attributes: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

TABLE D-7:
DS51591A-page 64
10
11
12
13
Step Action
In the IrDA standard demo PC program window:
Depress and release the Send Byte button.
Step 9 through Step 10 may be repeated.
In the IrDA standard demo PC program window:
Depress and release the Disconnect button.
On the PC:
If the PC is configured to show the IR icon in the
system tray, a single IR LED will be displayed.
250 BYTE S -> P DATA TRANSFER DEMO - WINDOWS
Result
On the PICDEM HPC Explorer Demo Board plus
MCP215X/40 Developer’s Daughter Board:
The “CTS” LED will strobe rapidly and then return to
the normal rate.
In the IrDA standard demo PC program window:
The “Raw Received Data” window will display the
data table that was transmitted by the MCP215X/40
Developer’s Daughter Board. This table is shown in
Appendix H. “MCP215X/40 250-Byte Data Trans-
mit Table”. The scroll bar may be used to inspect the
data received.
—
In the IrDA standard demo PC program window:
This will disconnect (close) the IR link. When the IR
link is disconnected, the PC icon will change to
indicate that the IR link is disconnected (has a red X).
On the PICDEM HPC Explorer Demo Board plus
MCP215X/40 Developer’s Daughter Board:
The “IR Link” and the “CTS” LEDs will turn off.
—
®
XP (CONTINUED)
© 2006 Microchip Technology Inc.