MCP6SX2DM-PCTLPD Microchip Technology, MCP6SX2DM-PCTLPD Datasheet - Page 19

• Manufacturer Part Number: MCP6SX2DM-PCTLPD
• Description: BOARD DAUGHTER PICTAIL MCP6SX2
• Manufacturer: Microchip Technology
• Series: PICtail™r

Specifications of MCP6SX2DM-PCTLPD

• Sensor Type: Light, Current Output
• Interface: Analog
• Sensitivity: 850nm
• Voltage - Supply: 2.5 V ~ 5.5 V
• Embedded: No
• Utilized Ic / Part: MCP6001, MCP6S22, MCP6S92
• Processor To Be Evaluated: MCP6Sx2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Sensing Range: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: MCP6SX2DM-PCTLPDR; MCP6SX2DM-PCTLPDR

2.4
 2004 Microchip Technology Inc.
MODE SELECTION
Using the PICkit™ 1 Signal Analysis PC Application
The Mode selection determines how the Signal Analysis Application will perform
analog-to-digital conversions (ADC) from the 10-bit ADC in the PIC16F684 and how
they will be displayed. There are two mode selections; Real Time and Acquisition, as
shown in Figure 2-4.
FIGURE 2-4:
In Real-time mode, data conversions are performed immediately and transmitted to the
PC. The data is displayed on a real-time strip chart.
In Acquisition mode, the data is stored in the serial EEPROMs. After the acquisition
sequence, the data is uploaded to the PC for post processing.
2.4.1
Real-time mode performs an ADC on the RC0/AN4 I/O port pin and immediately
transmits the data for display on the PC. The display option for this mode is the Strip
Chart function. The Speed (sps) drop-down menu controls the relative conversion
speed.
To use the Strip Chart function, click on the Strip Chart button. The Strip Chart window
is displayed, as shown in Figure 2-5. To start the conversion process, click Go. Use the
Speed (sps) drop-down menu (Figure 2-9) to control the sample speed.
FIGURE 2-5:
Real-time Mode
MODE SELECTION
STRIP CHART
DS51476A-page 15