0-1004308-0 Measurement Specialties Inc/Schaevitz, 0-1004308-0 Datasheet - Page 10

• Manufacturer Part Number: 0-1004308-0
• Description: SENSOR PIEZO FILM DESIGN KIT
• Manufacturer: Measurement Specialties Inc/Schaevitz

Specifications of 0-1004308-0

• Rohs Status: RoHS non-compliant
• Sensor Type: Vibration, Piezo Film
• Interface: Analog
• Embedded: No
• Utilized Ic / Part: Accelerometer, Smart Switch, Speaker & Vibration Piezo Film Sensors
• Voltage - Supply: -
• Sensitivity: -
• Sensing Range: -
• Other names: MSP1010

Piezo Film Solid State Switches
Piezo film's capability to generate a high voltage output under bending strain,
combined with its rugged form factor, make it an ideal candidate for solid state
impact switches. Rather than using a switch contact closure, the piezo film
generates a pulse which is detected by electronics. Although many of the DT's,
LDT's and FLDT's supplied by MSI are used for switch applications, it is
sometimes convenient to have a switch with integrated electronics.
The SW100 is an ideal configuration for impact detection and momentary switch
applications. A direct contact force on the tip of the stainless steel cantilever beam
of the SW100 induces strain on the laminated Piezo Film Sensor (PFS) element.
With dynamic strain, the PFS element generates an output that activates a built-in,
normally-open circuit. Once activated, the circuit resembles the closure of a
contact switch, but without the inherent discontinuity that contact points exhibit
because of corrosion, pitting and bouncing. Thus the SW100 provides a single
digital pulse that is ideal for triggering digital circuits and signal processing. The
imperviousness, elasticity and reliability of the PFS element, along with the noise
rejection characteristics of the circuit, combine to provide the SW100 with features that suit applications demanding consistent, reliable
performance throughout tens of millions of switching cycles.
Custom options are available to fit specific customer applications. For more information on the SW100, please call one of our applications
engineers .Detailed specification sheets are available from our website.
SW100-01-R
SW100-01-F
SW100-02-R
SW100-02-F
Description
*Please contact factory for custom part quotations and volume pricing.
Beam Tip
Curved
Curved
Flat
Flat
Measurement Specialties, Inc.
P.O. Box 799, Valley Forge, PA 19482
Tel: [phone] FAX [phone]
e-mail: [e-mail]
Stroke Direction to
Internet: www.msiusa.com
Trigger Switch
Reversed
Reversed
Forward
Forward
0-1002393-1
0-1002393-2
0-1002132-1
0-1002132-2
Part #
Smart Switch SW100
Low Volume Price
(US $)
$5.00
$5.00
$5.00
$5.00
15 MAY 01
Page 10 of 27