0-1004308-0 Measurement Specialties Inc/Schaevitz, 0-1004308-0 Datasheet - Page 12

• Manufacturer Part Number: 0-1004308-0
• Description: SENSOR PIEZO FILM DESIGN KIT
• Manufacturer: Measurement Specialties Inc/Schaevitz

Specifications of 0-1004308-0

• Rohs Status: RoHS non-compliant
• Sensor Type: Vibration, Piezo Film
• Interface: Analog
• Embedded: No
• Utilized Ic / Part: Accelerometer, Smart Switch, Speaker & Vibration Piezo Film Sensors
• Voltage - Supply: -
• Sensitivity: -
• Sensing Range: -
• Other names: MSP1010

Traffic Sensors
The Roadtrax BL Traffic Sensor is designed for Permanent or Temporary installation into or onto the road surface for the collection of traffic
data. The unique construction of the sensor allows it to be installed directly into the road in a flexible format so that it can conform to the profile of
the road. The flat construction of the sensor gives an inherent rejection of road noise due to road bending, adjacent lanes, and bow waves for
approaching vehicles. The small cut in the road minimizes the damage that is done to the road, speeds up the installation and reduces the
amount of epoxy that is used for the installation. The Roadtrax BL sensor is available both as a Class I sensor for the highest level of uniformity
needed for Weigh in Motion applications and as a Class II sensor which is more cost effective for Counting, Classifying, High speed Toll Booths,
Speed Detection, and Red Light Cameras.
•
•
•
•
•
•
•
•
•
For additional information, request the BL Sensor Package, also available on our website.
Uniform, high amplitude piezoelectric output compatible with
existing counters and classifiers on the market.
Excellent Signal to Noise Ratio which has an inherent 10:1
rejection of road noise due to road bending, adjacent lanes and
bow waves of approaching vehicles.
Easy installation in a 3/4" x 3/4" slot, which minimizes the
disturbance of the road, decreases the depth of the road cut, and
minimizes the amount of epoxy needed.
Flexible sensor - conforms to any road profile while maintaining a
uniform distance to the road surface.
The final installation is flush with the road surface -
snowplows will not do damage to the sensor.
Durable enough to withstand normal installation handling and
hundreds of millions ESAL's.
All sensors are 100% tested and certified for performance as a
complete sensor prior to shipment.
Custom Passive Signal Cable with High Density Polyethylene
Jacket which is rated for direct burial and resists nicks and cuts.
Class II sensors are tested to ±20% uniformity; Class I (WIM) are
tested to ±7% uniformity.
Permanent In-The-Road Installation
Measurement Specialties, Inc.
P.O. Box 799, Valley Forge, PA 19482
Tel: [phone] FAX [phone]
e-mail: [e-mail]
Internet: www.msiusa.com
6' BL Class II w/100'
8' BL Class II w/100'
10' BL Class II w/100'
11' BL Class II w/100'
12' BL Class II w/100'
6' BL WIM
8' BL WIM
10' BL WIM
11' BL WIM
12' BL WIM
Extra Cable (50'
increments only)
Description
0-1005333-1
1-1005333-1
3-1005333-1
4-1005333-1
5-1005333-1
1-1005438-1
2-1005438-1
4-1005438-1
5-1005438-1
6-1005438-1
0-1004552-0
Part #
15 MAY 01
Page 12 of 27
Price (US $)
(Qty 1-49)
$299.00
$359.00
$419.00
$449.00
$479.00
$568.00
$682.00
$796.00
$853.00
$910.00
$.50/ft