MT9M131C12STCD ES Aptina LLC, MT9M131C12STCD ES Datasheet - Page 2

• Manufacturer Part Number: MT9M131C12STCD ES
• Description: KIT DEV FOR MT9M131
• Manufacturer: Aptina LLC
• Series: Micron®DigitalClarity®r

Specifications of MT9M131C12STCD ES

• Sensor Type: CMOS Imaging, Color (RGB)
• Sensing Range: 1.3 Megapixel
• Interface: USB
• Sensitivity: 15 fps
• Voltage - Supply: 1.8 V ~ 3.1 V
• Embedded: No
• Utilized Ic / Part: MT9M131
• Silicon Manufacturer: Aptina Imaging
• Application Sub Type: Image Sensor
• Kit Application Type: Sensing - Image / Light
• Silicon Core Number: MT9M131
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 557-1246

General Description
Table 3:
PDF:09005aef824c90f2/Source: 09005aef824c90f9
MT9M131_LDS_2.fm - Rev. A 3/07 EN
MT9M131 Detailed Performance Parameters
The Micron
CMOS active-pixel digital image sensor. This device combines the MT9M011 image
sensor core with fourth-generation digital image flow processor technology from
Micron Imaging. It captures high-quality color images at SXGA resolution.
The MT9M131 features DigitalClarity™, Micron’s breakthrough, low-noise CMOS
imaging technology that achieves CCD image quality (based on signal-to-noise ratio and
low-light sensitivity) while maintaining the inherent size, cost and integration advan-
tages of CMOS.
The sensor is a complete camera-on-a-chip solution designed specifically to meet the
low-power, high fidelity demands of products such as security, biometrics, and video-
conferencing cameras. It incorporates sophisticated camera functions on-chip and is
programmable through a simple two-wire serial interface.
The MT9M131 performs sophisticated processing functions including color recovery,
color correction, sharpening, programmable gamma correction, auto black reference
clamping, auto exposure, automatic 50Hz/60Hz flicker avoidance, lens shading correc-
tion, auto white balance (AWB), and on-the-fly defect identification and correction.
Additional features include day/night mode configurations; special camera effects such
as sepia tone and solarization; and interpolation to arbitrary image size with continuous
filtered zoom and pan. The device supports both Xenon and LED-type flash light
sources in several snapshot modes.
The MT9M131 can be programmed to output progressive-scan images up to 30 frames
per second (fps) in preview power-saving mode, and 15 fps in full-resolution (SXGA)
mode. In either mode, the image data can be output in any one of six 8-bit formats:
• ITU-R BT.656 (formerly CCIR656, progressive scan only) YCbCr
• 565RGB
• 555RGB
• 444RGB
• Raw Bayer
• Processed Bayer
The FRAME_VALID (FV) and LINE_VALID (LV) signals are output on dedicated signals,
along with a pixel clock that is synchronous with valid data.
Table 3 lists typical values of MT9M131 performance parameters.
Output Gain
Read Noise
Parameter
®
Imaging MT9M131 is an SXGA-format single-chip camera with a 1/3-inch
MT9M131: SOC Megapixel Digital Image Sensor
2
Micron Technology, Inc., reserves the right to change products or specifications without notice.
7 e-RMS@ 16X
General Description
25 e-/LSB
©2007 Micron Technology, Inc. All rights reserved.
Typical
Preliminary