DM164130-1 Microchip Technology, DM164130-1 Datasheet - Page 14

• Manufacturer Part Number: DM164130-1
• Description: BOARD EVAL PICKIT PIC16LF1937
• Manufacturer: Microchip Technology
• Series: PICkit™r
• Type: MCUr

Specifications of DM164130-1

• Contents: Board
• Processor To Be Evaluated: PIC16LF1937
• Processor Series: PICxxF1xxx
• Data Bus Width: 8 bit
• Operating Supply Voltage: 1.8 V to 3.6 V
• Silicon Manufacturer: Microchip
• Core Architecture: PIC
• Core Sub-architecture: PIC16
• Silicon Core Number: PIC16F
• Silicon Family Name: PIC12F1xxx, PIC16F1xxx
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: PIC16LF1937
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

F1 Evaluation Platform User’s Guide
2.4
2.5
DS41401A-page 14
POWERING WITH THE CONNECTOR AT JP3
POWERING WITH PICkit™ SERIAL
3. Configure the PICkit 3 to supply a voltage between 1.8 and 3.6V. For proper LCD
4. Attach the PICkit 3 to the PICkit ICSP™ connector at the end of the board.
5. Activate the PICkit 3 power output.
To power with the connector at JP3, perform the following steps:
1. Make sure a jumper or an ammeter is connected across JP2.
2. If you are using a BLDC expansion, remove the jumper at JP1.
3. Verify the supply voltage to be between 1.8 and 3.6V. For proper LCD contrast,
4. Attach the power supply to JP3.
5. Turn on the power supply.
FIGURE 2-2:
To power with the PICkit Serial, perform the following steps:
1. Make sure a jumper or an ammeter is connected across JP2.
2. If you are using a BLDC expansion, remove the jumper at JP1.
3. Configure the PICkit Serial to supply a voltage between 1.8 and 3.6V. For proper
4. Attach the PICkit Serial to the PICkit Serial connector at the top corner of the
5. Activate the PICkit Serial power output.
contrast, the supply should be 3.3V.
the supply should be 3.3V.
LCD contrast, the supply should be 3.3V.
board.
POWERING WITH THE CONNECTOR AT JP3
© 2009 Microchip Technology Inc.