DM163030 Microchip Technology, DM163030 Datasheet - Page 16

• Manufacturer Part Number: DM163030
• Description: KIT DEV PICDEM LCD2
• Manufacturer: Microchip Technology
• Series: PICDEM™r
• Type: MCUr

Specifications of DM163030

• Contents: Evaluation Board
• Processor To Be Evaluated: PIC18F85J90
• Interface Type: RS-232
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: PIC18F8493
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PICDEM™ LCD 2 Demonstration Kit User’s Guide
2.2
DS51662C-page 16
PICDEM LCD 2 USED WITH AN IN-CIRCUIT EMULATOR OR IN-CIRCUIT
DEBUGGER
To use the PICDEM LCD 2 with an In-Circuit Emulator (ICE) or In-Circuit Debugger
(ICD), refer to the tool’s user’s guide for instructions on how to power-up and configure
the ICE/ICD, as well as how to connect to target boards.
Configure the PICDEM LCD 2 for the desired oscillator as described in Table 2-1. Refer
to the ICE/ICD user’s guide for any oscillator configuration requirements.
TABLE 2-1:
Crystal
Canned Oscillator
Device Internal Oscillator
Ceramic Resonator – no
internal caps
Ceramic Resonator – with
internal caps
Note:
Oscillator Selection on
PICDEM™ LCD 2
The MPLAB ICE can be plugged onto the board without any transition
socket for PIC18FXX90 devices. For other devices, a transition socket may
be needed.
OSCILLATOR SELECTION
JP9 and JP10 not connected. No canned oscillator on board,
crystal in Y2, JP11 and JP12 connected, caps in C16 and C17.
Put canned oscillator on socket Y3. Y2 empty, JP9, JP11 and
JP12 not connected.
JP11 and JP12 not connected. No canned oscillator on board.
JP9 and JP10 not connected. No canned oscillator on board,
resonator in Y2, JP11 and JP12 connected, caps in C16 and
C17.
JP9 and JP10 not connected. No canned oscillator on board,
resonator in Y2, JP11 and JP12 connected, C16 and C17
empty.
Modification on PICDEM™ LCD 2
 2010 Microchip Technology Inc.