TOOLSTICKSK Silicon Laboratories Inc, TOOLSTICKSK Datasheet - Page 14
![KIT STARTER TOOLSTICK](/photos/9/22/92294/toolsticksk__sml.jpg)
TOOLSTICKSK
Manufacturer Part Number
TOOLSTICKSK
Description
KIT STARTER TOOLSTICK
Manufacturer
Silicon Laboratories Inc
Series
ToolStickr
Type
MCUr
Datasheet
1.TOOLSTICKSK.pdf
(18 pages)
Specifications of TOOLSTICKSK
Contents
Base Adapter, C8051F330 Daughter Card and USB Cable
Interface Type
USB
Operating Supply Voltage
2.7 V to 3.6 V
Accessory Type
Starter Kit Adapter
Convert From
USB
Convert To
Daughter Board
Development Tool Type
Hardware - Daughter Card
Mcu Supported Families
ToolStick C8051F330
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
For Use With/related Products
C8051F300
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
For Use With
C8051F330
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
Other names
336-1348
To olSt ick-F 33 0DC
9. Information Locations
Example source code is installed by default in the “C:\SiLabs\MCU\ToolStick\F330DC\Firmware” directory during
the ToolStick installation.
Documentation
for
the
ToolStick
kit,
including
this
User’s
Guide,
can
be
found
in
the
C:\SiLabs\MCU\ToolStick\Documentation and the C:\SiLabs\MCU\ToolStick\F330DC\Documentation directories.
The installer for the ToolStick software is available at www.silabs.com/toolstick.
10. Board Revision Information
Revision SA-TS002-001 of the F330 Daughter Card has two test points swapped in the prototyping area. The test
point labeled P0.3 is connected to pin P1.3, and the test point labeled P1.3 is connected to pin P0.3 on the
microcontroller. This error is fixed on revision SA-TS002-002 and later boards. The revision number is located on
the back side of the daughter card.
14
Rev. 0.3