101-0523 Rabbit Semiconductor, 101-0523 Datasheet - Page 15

• Manufacturer Part Number: 101-0523
• Description: KIT DEV RABBIT3000/RCM3000
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 3000r
• Type: MPU Moduler

Specifications of 101-0523

• Rohs Status: RoHS non-compliant
• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• Processor To Be Evaluated: RCM3000
• Interface Type: RS-232, Ethernet
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 3.15 V to 3.45 V
• For Use With/related Products: RCM3000
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 316-1017

2.2.2 Connect Programming Cable
The programming cable connects the RCM3000 module to the PC running Dynamic C to
download programs and to monitor the module for debugging.
Connect the 10-pin connector of the programming cable labeled
the RCM3000 module as shown in Figure 2. Be sure to orient the marked (usually red)
edge of the cable towards pin 1 of the connector. (Do not use the
used for a normal serial connection.)
Connect the other end of the programming cable to a COM port on your PC.
User’s Manual
NOTE: Be sure to use the programming cable (part number 101-0513) supplied with this
NOTE: Some PCs now come equipped only with a USB port. It may be possible to use
Development Kit—the programming cable has red shrink wrap around the RS-232 con-
verter section located in the middle of the cable. Programming cables with blue or clear
shrink wrap from other from other Rabbit Semiconductor kits were not designed to work
with RCM3000 modules.
an RS-232/USB converter with the programming cable supplied with your RabbitCore
module. An RS-232/USB converter is available through the Web store. Note that not all
RS-232/USB converters work with Dynamic C.
Figure 2. Connect Programming Cable to RCM3000
DIAG
PROG
connector, which is
to header J3 on
7