TOOLSTICK360DC Silicon Laboratories Inc, TOOLSTICK360DC Datasheet - Page 2

• Manufacturer Part Number: TOOLSTICK360DC
• Description: DAUGHTER CARD TOOLSTCK C8051F362
• Manufacturer: Silicon Laboratories Inc
• Series: ToolStickr
• Type: MCUr

Specifications of TOOLSTICK360DC

• Contents: Board
• Processor To Be Evaluated: C8051F360
• Interface Type: USB
• Operating Supply Voltage: 2.7 V to 3.6 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: C8051F360
• For Use With: 336-1345 - TOOLSTICK BASE ADAPTER336-1182 - ADAPTER USB DEBUG FOR C8051FXXX
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1411

To olSt ick-F 36 2DC
2. Contents
The ToolStick-F362DC kit contains the following items:
ToolStick C8051F362 Daughter Card
A ToolStick daughter card requires a ToolStick Base Adapter to communicate with the PC. ToolStick Base Adapters
can be purchased at www.silabs.com/toolstick.
3. ToolStick Overview
The purpose of the ToolStick is to provide a development and demonstration platform for Silicon Laboratories
microcontrollers and to demonstrate the Silicon Laboratories software tools, including the Integrated Development
Environment (IDE).
The ToolStick development platform consists of two components: the ToolStick Base Adapter and a daughter card.
The ToolStick Base Adapter provides a USB debug interface and data communications path between a Windows
PC and a target microcontroller.
The target microcontroller and application circuitry are located on the daughter card. Some daughter cards, such
as the C8051F362 Daughter Card, are used as general-purpose development platforms for the target
microcontrollers and some are used to demonstrate a specific feature or application.
The C8051F362 Daughter Card includes a pair of LEDs, a potentiometer, a resistor across the C8051F362’s
current DAC output pin, a switch connected to a GPIO, and a small prototyping area which provides access to all of
the pins of the device. This prototyping area can be used to connect additional hardware to the microcontroller and
use the daughter card as a development platform.
Figure 3 shows the ToolStick C8051F362 Daughter Card and identifies the various components.
Power LED
P1.3 LED
Full Pin Access
Voltage Regulator
(5 V VBUS to 3.3 V)
C8051F362
P1.6 Potentiometer
Figure 3. ToolStick C8051F362 Daughter Card
2
Rev. 0.2