C8051F005-TB Silicon Laboratories Inc, C8051F005-TB Datasheet - Page 170

• Manufacturer Part Number: C8051F005-TB
• Description: BOARD PROTOTYPING W/C8051F005
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F005-TB

• Contents: Board
• Data Bus Width: 8 bit
• Silicon Manufacturer: Silicon Laboratories
• Core Architecture: 8051
• Silicon Family Name: C8051F00x
• Kit Contents: Board
• Features: JTAG Connector, Debug Adapter Interface, Analog I/O Configuration
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: C8051F005
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

21.3.
Each MCU has on-chip JTAG and debug circuitry that provide non-intrusive, full speed, in-circuit debug using the
production part installed in the end application using the four pin JTAG I/F. Silicon Labs’ debug system supports
inspection and modification of memory and registers, setting breakpoints, watchpoints, single stepping, and run and
halt commands. No additional target RAM, program memory, or communications channels are required. All the
digital and analog peripherals are functional and work correctly (remain in sync) while debugging. The WDT is
disabled when the MCU is halted during single stepping or at a breakpoint.
The C8051F000DK, C8051F005DK, C8051F010DK, and C8051F015DK are development kits with all the
hardware and software necessary to develop application code and perform in-circuit debugging with each MCU in
the C8051F000 family. Each kit includes an Integrated Development Environment (IDE) which has a debugger and
integrated 8051 assembler. It has an RS-232 to JTAG protocol translator module referred to as the EC. There is
also a target application board with a C8051F000, F005, F010, or F015 installed and with a large prototyping area.
The kit also includes RS-232 and JTAG cables, and wall-mount power supply.
Debug Support
Rev. 1.7
C8051F000/1/2/5/6/7
C8051F010/1/2/5/6/7
170