DEMO9RS08KA8 Freescale Semiconductor, DEMO9RS08KA8 Datasheet - Page 9

• Manufacturer Part Number: DEMO9RS08KA8
• Description: BOARD DEMO FOR MC9RS08KA8
• Manufacturer: Freescale Semiconductor
• Series: RS08r
• Type: MCUr

Specifications of DEMO9RS08KA8

• Contents: Board, Adapter, Cable, CD, Documentation
• Silicon Manufacturer: Freescale
• Core Architecture: RS08
• Core Sub-architecture: RS08
• Silicon Core Number: MC9RS08
• Silicon Family Name: RS08KA
• Kit Contents: Board
• Rohs Compliant: Yes
• For Use With/related Products: MC9RS08KA8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2 Hardware Features
2.1 Demonstration Board Features
The DEMO9RS08KA8 board features:
A MC9RS08KA8 microcontroller (in 20-Pin DIP package, already programmed with a
demo application);
A provision for a low-frequency crystal;
A 12 V DC power supply input connector;
Power input selection jumper for selecting the input voltage source:
o
o
A built-in USB-to-BDM circuitry which allows the host PC to communicate with the
microcontroller through a standard USB interface. When using an external in-circuit
debugger (via the “BDM” connector), the USB-to-BDM circuitry must be bypassed by
removing the BKGD and RESET# jumpers.
A Reset push-button connected to the MCU Reset pin.
A series of inputs:
o
o
o
Two LEDs together with jumpers to connect/disconnect them to/from the microcontroller;
An RS-232 transceiver (with a DB9 female connector), together with jumpers to
connect/disconnect them to/from the microcontroller;
A 36-pin I/O female header connector on the bottom of the board.
12 V DC input connector;
USB connector.
Two push-buttons, together with jumpers to connect/disconnect them to/from the
microcontroller;
A potentiometer, together with a jumper to connect/disconnect it to/from the
microcontroller;
A photoresistor, together with a jumper to connect/disconnect it to/from the
microcontroller.
Page 7