CYCLONEMAX Freescale Semiconductor, CYCLONEMAX Datasheet - Page 74

• Manufacturer Part Number: CYCLONEMAX
• Description: CYCLONE MAX FLASH PROGRAM
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®r
• Type: FLASHr

Specifications of CYCLONEMAX

• Contents: Programmer/Debugger
• Positions/sockets: 1
• Description/function: Programmer, Debugger
• Silicon Family Name: MPC5xx
• Core Architecture: Coldfire, Power Architecture
• Core Sub-architecture: Coldfire V2, Power Architecture
• Rohs Compliant: Yes
• For Use With/related Products: MPC5xx / 55xx
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

70
(1) Drop-down Box 1
(2) Drop-down Box 2
(3) Close Button
(4) Open Button
(5) Refresh List
(6) Cyclone IP Number
(7) Cyclone Device Name
(8) MAC Address
(9) Cyclone Device Type
CYCLONE MAX
There are three options available in this drop-down box, of which
“ Ethernet Port” is displayed. The other options are “ Serial Port” and “ USB
Port” . Changing to any one of the three Ports will list the devices which
are found over that specific Port.
The “ Open” button opens a device for access. This is a required step
This is the IP number which will be associated with the Cyclone MAX. It
This is a label which can be used to identify the Cyclone MAX by name,
e.g., “ John’ s Cyclone” or “ Manufacturing Floor.”
Once one of the three (Serial, USB, or Ethernet) communication
interfaces has been selected in the first drop-down box, a list of all
available Cyclone devices over that interface will be displayed for
selection.
before changing the parameters on the selected device. Once a device
has been selected through the second drop-down box and is opened for
access, its information will be displayed at the bottom of the dialog box.
Will refresh the dialog boxes by searching for devices which are currently
connected via the Serial or USB interfaces, or are found on the network.
needs to be a unique IP number which can be accessible on the network.
The “ Close” button is active only when a device has been opened for
access. Once a device has been opened for access, it needs to be closed
before another device can be opened for access.
This is the Media Access Control address, the unique number of an
Ethernet device on the network. This is programmed by P&E and cannot
be modified.
This displays the type of Cyclone hardware.
Cyclone MAX User Manual