M30620T-CPE Renesas Electronics America, M30620T-CPE Datasheet - Page 47

• Manufacturer Part Number: M30620T-CPE
• Description: EMULATOR COMPACT M16C/62A/30/60
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M30620T-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M16C/62A, M16C/30, M16C/60
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

(2) If an Error is Detected in Self-checks
Table 5.5 lists how to remedy the troubles if the target status LED display is abnormal in self-checks.
When an error is detected, shut off the power of the emulator and the target system and follow the
steps in the Table 5.5. Then, reactivate the power of the emulator and the target system.
Table 5.5 Error display in self-checks and how to remedy it
POWER CLOCK
POWER CLOCK
POWER CLOCK
POWER CLOCK
POWER CLOCK
POWER CLOCK
POWER CLOCK
POWER CLOCK
POWER CLOCK
POWER CLOCK
POWER CLOCK
POWER CLOCK
POWER CLOCK
POWER CLOCK
Notes on Self-checks:
LED display
: Blinking
: OFF
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
RESET
• Be sure to disconnect the target system before executing self-checks.
• If self-checks do not result normally, the emulator may be damaged. Then, contact
• When an oscillator installed in the emulator is changed to the oscillator of 16 MHz,
your local distributor.
self-checks may not terminate normally. Use the oscillator of 10 MHz when
executing self-checks.
RUN
RUN
RUN
RUN
RUN
RUN
RUN
RUN
RUN
RUN
RUN
RUN
RUN
RUN
Emulator does not work properly.
- Check power is being supplied to the emulator.
- If power is being supplied to the emulator, the emulator may be damaged.
Report the LED status to your local distributor.
Emulator does not work properly.
- Check JP1 (MCU power supply selection jumper) is set to INT side.
- If JP1 is set to INT side, the emulator may be damaged. Report the LED status
to your local distributor.
Emulator does not work properly.
- The emulator may be damaged. Report the LED status to your local distributor.
( 45 / 52 )
CAUTION
Checkpoint