M30260T2-CPE-GP Renesas Electronics America, M30260T2-CPE-GP Datasheet - Page 17

• Manufacturer Part Number: M30260T2-CPE-GP
• Description: DEV COMPACT EMULATOR M16C/26A,28
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M30260T2-CPE-GP

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M16C/26A
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M30290T2-CPE User’s Manual
(5) Power supply for the user system
(6) Host machine
(7) Pitch converter board such as M30290T-80FPD
1.2.2 Names and Functions of each part of the Emulator
Figure 1.2 shows the names of the LEDs on the upper panel of the emulator.
Figure 1.2 Names of the LEDs on the upper panel of the M30290T2-CPE
(1) System Status LEDs
The system status LEDs indicate the emulator main unit’s operating status etc. Table 1.2 lists the definition of the system status
LEDs.
Table 1.2 Definitions of the system status LEDs
REJ10J0494-0200 Rev.2.00 July 16, 2005
POWER
SAFE
Name
This is a power supply for the user system. As this emulator cannot supply the power to the user system, supply the power
to the user system separately from the emulator.
This is a personal computer for controlling the emulator.
This is a pitch converter board for connecting to an MCU foot pattern on the user system. For details, refer to “2.8
Connecting the User System” (page 30).
Target status LED
LED3: User system power （POWER）
LED4: Clock oscillation （CLOCK）
LED5: MCU RESET pin （RESET）
LED6: Program execution （RUN）
Number
LED1
LED2
System status LEDs
LED1: Emulator power (POWER)
LED2: Emulator startup (SAFE)
Orange
Green
Color
Status
OFF
OFF
ON
ON
POWER
POWER
CLOCK
RESET
SAFE
LED1
RUN
LED6
LED3
LED2
Power is supplied to the emulator.
Power is not supplied to the emulator.
Emulator system has started normally.
Emulator system has not started normally.
SAFE
RUN
POWER
POWER
CLOCK
RESET
COMPACT EMULATOR
STATUS
SYSTEM
TARGET
STATUS
COMPACT EMULATOR
M30290 T2-CPE
MADE IN JAPAN
Meaning
MADE
5.0V
POWER USB
JP1
5.0V
JP2
3.3V
EXT
INT
J1: Power connector
SW1
J2: USB interface connector
JP2: MCU power supply voltage selection jumper
JP1: MCU power supply source selection jumper
System reset switch
(factory-setting: 5.0V)
(factory-setting: INT)
Page 15 of 86
1. Outline