R0E5212BACPE00 Renesas Electronics America, R0E5212BACPE00 Datasheet - Page 36

• Manufacturer Part Number: R0E5212BACPE00
• Description: EMULATOR COMPACT/CONV BRD R8C/2B
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of R0E5212BACPE00

• Contents: Compact Emulator, IDE, Assembler and Linker
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: R8C/2A, R8C/2B
• Lead Free Status / RoHS Status: Supplier Unconfirmed, Contains lead / RoHS non-compliant

R0E521000CPE00 User’s Manual
Figure 2.16 Target status LEDs display when the emulator starts up normally
(when user system connected: setting the POWER selection jumper to EXT POWER side and use system is ON)
Figure 2.17 Target status LEDs display when the emulator starts up normally
(when user system connected: setting the POWER selection jumper to EXT POWER side and use system is OFF)
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 34 of 92
After turning the power ON.
POWER
CLOCK
RESET
RUN
POWER
CLOCK
RESET
After turning the power ON.
RUN
(Power selection jumper: EXT,
user system is ON)
If the POWER LED does not light, shut
off the system. Then check the setting
of the jumper switches and if the power
is properly supplied to the user system.
When the user system connected:
LED3
LED4
LED5
LED6
Because the power of the user system is off,
POWER LED does not light. RESET LED
lights.
(Power selection jumper: EXT, user
system is OFF)
When the user system connected:
LED 3
LED4
LED5
LED6
POWER
CLOCK
RESET
After starting up the emulator debugger.
RUN
POWER
CLOCK
RESET
RUN
After starting up the emulator debugger.
LED3
LED4
LED5
LED6
LED3
LED4
LED5
LED6
: ON
: OFF
: ON
: OFF
2. Setup