R0E5212BACPE00 Renesas Electronics America, R0E5212BACPE00 Datasheet - Page 54

• Manufacturer Part Number: R0E5212BACPE00
• Description: EMULATOR COMPACT/CONV BRD R8C/2B
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of R0E5212BACPE00

• Contents: Compact Emulator, IDE, Assembler and Linker
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: R8C/2A, R8C/2B
• Lead Free Status / RoHS Status: Supplier Unconfirmed, Contains lead / RoHS non-compliant

R0E521000CPE00 User’s Manual
(2) Flash Clear tab
1) Setting to clear the MCU’s internal flash ROM
When the tab settings (1) to (2) above are completed, click OK button.
3.1.3 Checking Connections of the Emulator System
Check to see that the emulator debugger has been connected correctly to the emulator.
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 52 of 92
Ready
Checking connections of the emulator system
When the emulator debugger is connected correctly to the emulator after
you’ve finished setting up the Init dialog box and the MCU Setting dialog
box, you will see a message “Connected” displayed on the Debug tab of the
Output window.
Setting to clear the MCU’s internal flash ROM
Specify whether or not you want the MCU’s internal flash ROM to
be cleared when downloading the user program or data. (When
cleared, the content of the flash ROM is initialized to 0xFF.) The
MCU’s internal flash ROM is listed in block units (The size and
number of the area of the Flash ROM varies depending on the
selected MCU file).
- Any block which has had its check box selected is not cleared
- Any block which has had its check box deselected is cleared
- Click the Select All button, or the Clear All button, all blocks
The option you have specified here remains effective the next time
you start up.
when downloading. The memory content of this block remains
intact unless overwritten by downloading.
Note:
When this product starts up, the internal flash ROM area is
cleared with “0x04” [NOP instruction], so that the selected
blocks (flagged by a check mark) retain “0x04” [NOP
instruction], and not cleared to “0xFF.”
when downloading.
will be selected or deselected
3. Usage (How to Use the Emulator Debugger)