M30800T-CPE Renesas Electronics America, M30800T-CPE Datasheet - Page 32

• Manufacturer Part Number: M30800T-CPE
• Description: EMULATOR COMPACT FOR M16C/80
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M30800T-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M16C/80
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 3. Changing the Settings
3.1 Using the Emulator without the Target System
3.2 Using the Emulator with the Target System
3.3 Using the P8
3.4 Using the P8
How to use the emulator without the target system is shown below.
(1) Set the "MCU power supply select jumper" to INT side and "MCU power voltage select jumper"
How to use the emulator with the target system is shown below.
(1) Set the "MCU power supply select jumper" to EXT side (see page 20).
(2) Connect the target system (see page 22).
(3) Connect the power supply for the emulator (see page 23).
How to use the emulator when using the P8
(1) Set the "P8
How to use the emulator when using the P8
(1) Set the "P8
7
7
/X
/X
to 5.0 V side (see page 20).
The target MCU operates with 5.0 V of power supply voltage supplied from the emulator.
The setting of "MCU power voltage select jumper" is invalid.
Connect the LCC probe on the lower board of the emulator to the LCC socket (option) or the pitch
converter board (option).
As the emulator cannot supply power to the target system, provide the target system with a
separate power supply from that of the emulator.
CIN
CIN
Pin as a Port
Pin as Sub-Clock Input
7
7
/X
/X
CIN
CIN
select switch" to P87 side (see page 20).
select switch" to XCIN side (see page 20).
( 30 / 52 )
7
7
/X
/X
CIN
CIN
pin as a port is shown below.
pin as sub-clock input is shown below.