M30800T-CPE Renesas Electronics America, M30800T-CPE Datasheet - Page 35

• Manufacturer Part Number: M30800T-CPE
• Description: EMULATOR COMPACT FOR M16C/80
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M30800T-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M16C/80
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

(3) Changing the Internal Oscillator Circuit of Emulator
An oscillator circuit for 20 MHz is mounted on this product as an oscillator of a main clock (XIN)
oscillator circuit when shipped from factory. When using with the operating frequency other than 20
MHz, it is possible to replace it with a commercially available oscillator circuit board. Figure 3.3
shows the position of the clock and the specifications of the circuit. Table 3.2 lists the recommended
oscillator.
Figure 3.3 Position of the clock and the specifications of the circuit
Table 3.2 Recommended oscillator
Figure 3.4 Direction for mounting the oscillator
Notes on Replacing Internal Clock of Emulator:
(1) Removing the oscillator
(2) Connecting the oscillator
KINSEKI, LIMITED
Remove the oscillator mounted on the emulator. The position of the oscillator, see Figure 3.3.
Mount the oscillator with a desired operating frequency. In this time, care about the direction.
Manufacturer
• Take care not to attach the converter board in a wrong direction. It may cause a fatal
• Always shut OFF power of the emulator and the target system when connecting and
damage to the compact emulator.
disconnecting the target system.
JXO-5 series
Type name
( 33 / 52 )
IMPORTANT
Match the power supply (black marking) of the
oscillator and 5.0 V (white marking) of the board.