PC7501 Renesas Electronics America, PC7501 Datasheet - Page 7

• Manufacturer Part Number: PC7501
• Description: EMULATOR BASE UNIT M16C PLATFORM
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of PC7501

• Contents: PC7501 Emulator, Cables, User Manual and CD-ROM
• For Use With/related Products: M16C Family
• For Use With: R0E521134EPB00 - KIT EMULATOR PROBE FOR PC7501R0E521000EPB00 - PROBE EMULATOR FOR PC7501
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

PC7501 User’s Manual
Terminology
Terminology
Some specific words used in this user's manual are defined as follows:
PC7501 system
This means the emulator system built around the emulator PC7501. This emulator system is configured with the
emulator PC7501, an emulation probe M3xxxxTx-EPB or R0ExxxxxxEPB00, an emulator debugger M3T-PDxxF, and
a host machine.
Host machine
This means a personal computer where the emulator debugger M3T-PDxxF runs to control the emulator PC7501.
Emulation probe
An emulation probe is provided for each MCU Series or MCU and it emulates the operation of each MCU characteristic.
The emulation probe M3xxxxTx-EPB or R0ExxxxxxEPB00 for the emulator PC7501 adopts the evaluation MCU
method of equipping the inside of the emulation probe with evaluation MCU.
Emulator debugger
This means a software tool, M3T-PDxxF to control the emulator PC7501 from a personal computer through an
interface.
Firmware
This means a program that controls the hardware of the PC7501 system by decoding the contents of communication
with the emulator debugger M3T-PDxxF. This program is contained in EEPROM on the emulator PC7501's inside
board.
At startup, the emulator debugger M3T-PDxxF checks the configuration of the emulator PC7501 and emulation probe
M3xxxxTx-EPB or R0ExxxxxxEPB00, and downloads the appropriate firmware when it is necessary.
Target MCU
A target MCU means the MCU you are going to debug.
Target system
A target system means a user's application system using the MCU to be debugged.
#
In this user’s manual, this symbol is used to show active LOW. (e.g. RESET#)
R20UT0207EJ0500 Rev.5.00
Page 7 of 50
Nov 01, 2010