HS2214EPI62H-U Renesas Electronics America, HS2214EPI62H-U Datasheet - Page 231

• Manufacturer Part Number: HS2214EPI62H-U
• Description: DEV EMULATOR BASE UNIT H8S/2214
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of HS2214EPI62H-U

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: H8S/2214
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

This section describes the diagnostic test procedure using the E6000 test program.
D.1
To execute the test program, use the following hardware; do not connect the user system interface cable and user
system.
• E6000 emulator (HS2214EPI62H)
• Host computer
• The E6000 PC interface board (select either from the followings according to the PC interface
1. Install the E6000 PC interface board in the host computer and connect the supplied PC interface cable to the
2. Connect the PC interface cable to the emulator.
3. Connect the supplied AC adapter to the emulator.
4. Initiate the host computer to make it enter DOS prompt command input wait state.
5. Turn on the emulator power switch.
specifications):
PCI bus interface board (HS6000EIC01H or HS6000EIC02H)
PCMCIA interface card (HS6000EIP01H)
USB adapter (HS6000EIU01H or HS6000EIU02H)
LAN adapter (HS6000ELN01H)
board.
System Set-Up for Test Program Execution
Appendix D Diagnostic Test Procedure
209