ZGP323ICE01ZEM Zilog, ZGP323ICE01ZEM Datasheet - Page 20

• Manufacturer Part Number: ZGP323ICE01ZEM
• Description: PLATFORM DEV ICE Z8 GP ZGP323
• Manufacturer: Zilog

Specifications of ZGP323ICE01ZEM

• Processor To Be Evaluated: ZGP323
• Interface Type: RS-232, Ethernet, USB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3399; ZGR323ICE01ZEM

UM017503-0208
Note:
OTP Programming
Note:
Burn Code from the Current Project
Do not connect to the Z8 GP ICE when programming windowed CDIP parts. See
Code from an Existing Hex File
If you are in debugging mode, click Debug
debugging.
Refer to Zilog Developer Studio II—Crimzon and Z8 GP User Manual (UM0164) on the
ZDS II CD-ROM and the ZDS II online help for further information on setting, filling, and
reading memory.
Use the Z8 GP ICE OTP Programming Module to burn your program onto a ZGP323 fam-
ily chip. There are two ways to burn an OTP chip:
1.
2.
Follow the steps below to burn code from the current project built in ZDS II (loaded in
emulator RAM):
1. Connect the OTP programming module to the emulator as described in
2. Select the OTP chip to be burned and the appropriate package converter.
3. Install the package converter, if used, into the ZIF socket on the OTP programming
4. Install the OTP chip to be burned into the ZIF socket on the OTP programming
5. In ZDS II, open the project for the code to be burned onto the chip.
6. Select Tools
Burn Code from the Current Project
Burn Code from an Existing Hex File
GP ICE to OTP Programming Module (Optional)
module.
adapter. Match pin 1 of the chip with pin 1 of the ZIF socket.
Z8 GP
→
OTP Programming to open the OTP window, see
™
ZGP323 In-Circuit Emulator and Development Platform
on page 19 when programming windowed CDIP parts.
→
Stop Debugging or press Shift-F5 to stop
on page 3.
Figure
Connecting Z8
Sample Project
User Manual
11.
Burn
17