ZGP323P4010ZAC Zilog, ZGP323P4010ZAC Datasheet - Page 18
![no-image](/images/manufacturer_photos/0/7/729/zilog_sml.jpg)
ZGP323P4010ZAC
Manufacturer Part Number
ZGP323P4010ZAC
Description
KIT ACCESSORY Z8 GP ZGP323 40DIP
Manufacturer
Zilog
Datasheet
1.ZGP32302010ZDH.pdf
(25 pages)
Specifications of ZGP323P4010ZAC
Accessory Type
Target Pod Accessory Kit
Processor To Be Evaluated
ZGP323
Interface Type
RS-232, Ethernet, USB
For Use With/related Products
Z8 GP ZGP323
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
269-3744
Page 18
Z8 GP™ ZGP323 In-Circuit Emulator and Development Platform
User Manual
Peek/Poke Registers
1. ZDS II makes it easy for you to set and read emulator register contents. With the
2. In the
3. Press
Refer to the ZDS II – Z8 GP User Manual (UM0178) on the ZDS II CD-ROM and the
ZDS II online help for further information on setting and reading register values.
Peek/Poke Memory
4. ZDS II also allow to set and read memory contents. With the ledblink_c.pro project
5. In the
6. Press
Refer to the ZDS II User Manual (UM0178) on the ZDS II CD-ROM and the ZDS II
online help for further information on setting, filling, and reading memory.
OTP Programming
Once your program is running properly, use the Z8 GP ICE OTP Programming Module to
burn your program onto a ZGP323 family chip. There are two ways to burn an OTP chip:
•
•
Burning Code from the Current Project
To burn code from the project currently built in ZDS II (loaded in emulator RAM):
1. If you are currently in debugging mode, stop by clicking
OTP Programming
Note:
ledblink_c.pro project open and ZDS II connected to the emulator (target), select
--> Debug Windows –> Registers
value.
open and ZDS II connected to the emulator (target), select
> Memory
value. (Values begin in the second column after the
Burn the code in the current ZDS II project from emulator RAM onto the OTP chip.
Load an existing hex file into emulator RAM and burn it onto the OTP chip.
or pressing Shift-F5.
Enter
Enter
Registers
Memory
Do not connect to the Z8 GP ICE when programming windowed CDIP parts.
Refer to “Burning Code from an Existing Hex File” on page 20 when pro-
gramming windowed CDIP parts.
.
. The new value displays in red.
. The new value displays in red.
window, double-click the value you want to change and type in a new
window, double-click the value of any register and type in a new
.
Address
Build > Debug > Stop Debug
View –> Debug Windows –
column.)
UM019302-0407
View