ZLP128ICE01ZEM Zilog, ZLP128ICE01ZEM Datasheet - Page 90

• Manufacturer Part Number: ZLP128ICE01ZEM
• Description: EMULATOR CRIMZON Z8 ZLP12840
• Manufacturer: Zilog

Specifications of ZLP128ICE01ZEM

• Interface Type: RS-232, Ethernet, USB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3829

PS024410-0108
Bit
Position Value
[5]
[4]
[3]
[2:0]
SYNC Mode—When enabled, the first pulse of Timer 8 (the carrier) is always synchronized
with Timer 16 (the demodulated signal). It can always provide a full carrier pulse. This bit is not
reset upon Stop Mode Recovery.
T16_Out Disable—Set this bit to disable toggling of the Timer 16 output. Time-out interrupts
are still generated. This bit is not reset upon Stop Mode Recovery.
T8 Demodulate—(Capture one cycle.) This bit is not reset upon Stop Mode Recovery.
Reserved—Always reads 111b. Writes have no effect.
0
1
0
1
0
1
Description
Disable SYNC mode.
Enable SYNC mode.
T16 toggles normally.
T16 toggle is disabled.
T8 captures events normally.
T8 becomes active on the third edge, captures events on the fourth and fifth edges,
and generates an interrupt on the fifth edge. After a T8 time-out the event count
resets to 0 and the fourth and fifth edges are captured again.
P R E L I M I N A R Y
Product Specification
Timers
84