UP2-DEVKIT/UNIV Altera, UP2-DEVKIT/UNIV Datasheet - Page 20

KIT DEVELOPMENT UNIVERSITY UP2

UP2-DEVKIT/UNIV

Manufacturer Part Number
UP2-DEVKIT/UNIV
Description
KIT DEVELOPMENT UNIVERSITY UP2
Manufacturer
Altera
Type
Education Kitr
Datasheet

Specifications of UP2-DEVKIT/UNIV

Contents
Quartus®II Design Software, UP2 Dev. Board, Byteblaster Download Cable and Power Supply
For Use With/related Products
Flex 10K® FPGAs
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
544-1293

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
UP2-DEVKIT/UNIV
Manufacturer:
ALTERA
0
University Program UP2 Education Kit User Guide
20
6.
7.
8.
9.
EPF10K70 Configuration
This section describes the procedures for configuring the EPF10K70
device (i.e., how to set the on-board jumpers, connect the ByteBlaster II
download cable, and set options in the Quartus II software).
Setting the On-Board Jumpers for EPF10K70 Configuration
To configure the EPF10K70 device in a JTAG chain, set the jumpers TDI,
TDO, DEVICE, and BOARD as shown in Figure 8.
Figure 8. Jumper Settings for Configuring Only the FLEX 10K Device
Connecting the ByteBlaster II Download Cable for the EPF10K70
Configuration
Attach the ByteBlaster II cable directly to the PC’s parallel port and to the
JTAG_IN connector on the UP2 Education Board. For more information
on setting up the ByteBlaster II cable, see the ByteBlaster II Parallel Port
Download Cable Data Sheet.
Click Detect JTAG Chain Info to have the ByteBlaster II cable check
the device count, JTAG ID code, and total instruction length of the
JTAG chain. A message just above the Detect JTAG Chain Info
button reports the information detected by the ByteBlaster II cable.
This message must be manually verified to match the information in
the Device Names & Programming File Names box.
Click Save JCF. In the Save JCF dialog box, type the name of the file
in the File Name box and then select the desired directory in the
Directories box to save the current settings to a JTAG Chain File
(.jcf) for future use. Click OK.
Click OK to save changes.
Click Program in the Quartus II Programmer.
TDI
C1
C2
C3
TDO
C1
C2
C3
DEVICE BOARD
C1
C2
C3
C1
C2
C3
Altera Corporation

Related parts for UP2-DEVKIT/UNIV