FS2003-UPG15 Equinox Technologies, FS2003-UPG15 Datasheet - Page 36

• Manufacturer Part Number: FS2003-UPG15
• Description: UPGRADE FS2003 ATMEL AT91SAM7
• Manufacturer: Equinox Technologies
• Type: Upgrade Kitr

Specifications of FS2003-UPG15

• For Use With/related Products: FS2003
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.9 Re-assembling the programmer
a
b
c
Please note:
Hardware installation is now complete.
FS2003 ISP Programmer - User Guide V1.08 – 1
•
•
•
•
Re-fit lid to programmer
Re-fit the four screws in the back of the case
Ensure that the PC, programmer and Target
System power is switched OFF.
The FAIL LED will flash when you initially power up the programmer if you are running
firmware 2.46 or below.
If you are running firmware version 2.46 or greater the FAIL LED will no longer FLASH.
To clear the FAIL LED condition, use the <Up> / <Down> keys to select a Programming
Project and then press the <Yes> key .
If there are no Programming Projects Loaded into the Programmer – Flash Memory Store,
the FAIL LED will continue to FLASH until at least one Project is uploaded.
st
August 08
The ISP Cable should fit through the slot in the
end panel.
33