FS-929 Digi International, FS-929 Datasheet - Page 10

• Manufacturer Part Number: FS-929
• Description: JTAG-BOOSTER FOR SA-11X0 3.3V
• Manufacturer: Digi International
• Series: Digi/FS Forthr
• Type: FLASHr

Specifications of FS-929

• Contents: Programmer and Associated Interface Software
• For Use With/related Products: Intel StrongARM SA-11x0, 3.3V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10) Two Flash-EPROMs Intel 28F008 selected with chip select CS0 are found.
(11) The resulting data bus size is printed here.
(12) In this example one block must be erased.
10
The initialization file JTAG1100.INI was found in the current directory.
The target identification line of the initialization file is printed here.
The resulting I/O-address of the parallel port is printed here.
A JTAG-Booster is found on the parallel port
The JTAG chain is analyzed. There may be several parts in the JTAG
chain. The chain is analyzed and all parts except the Intel StrongARM SA-
1100 are switched to bypass mode.
The length of all instruction registers in the JTAG chain are added.
The position of the Intel StrongARM SA-11x0 in the JTAG chain is
checked.
The position of the JTAG instruction register of the Intel StrongARM SA-
11x0 is checked
The real length of the boundary scan register is displayed here and
compared with the boundary scan register length of a Intel StrongARM SA-
1100.
JTAG_SA11x0b.doc