FS-9019 Digi International, FS-9019 Datasheet - Page 66

• Manufacturer Part Number: FS-9019
• Description: JTAG-BOOSTER FOR ALCHEMY 3.3V
• Manufacturer: Digi International
• Series: Digi/FS Forthr
• Type: FLASHr

Specifications of FS-9019

• Contents: Programmer and Associated Interface Software
• For Use With/related Products: AMD Alchemy, 3.3V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

AMD Alchemy Solutions Processors
/OFFSET=hhhhhh
The programming starts at an offset of hhhhhh relative to the start address of the
flash device. If the offset is negative, the offset specifies an address relative to
the end of the flash device. See also option /TOP
Default:
Abbreviation:
/TOP
If the option /TOP is used the option /OFFSET= specifies the address where the
programming ends (plus one) instead of the starting address. This option is very
important for Intel CPU architectures, because target execution always starts at
the top of the address space.
/FILE-OFFSET=hhhhhh
If FILE-OFFSET is specified, the first hhhhhh bytes of the file are skipped and
not programmed to target.
Default:
Abbreviation:
/LENGTH=hhhhhh
The number of programmed bytes may be limited to LENGTH. If no LENGTH is
specified the whole file is programmed.
Default:
Abbreviation:
/NODUMP
In case of a verify error the contents of the flash memory is written to a file with
the extension .DMP. With /NODUMP you can suppress this feature.
/ERASEALL
Erase the whole flash device. If this option isn't set, only those blocks are erased
where new data should be written to.
/NOERASE
This option prevents the flash device from being erased.
66
/OFFSET=0
/O=
/FILE-OFFSET=0
/FO=
/LENGTH=4000000 (64 MByte)
/L=
JTAG_alchemyb.doc