P7S-14P Omron, P7S-14P Datasheet - Page 5

• Manufacturer Part Number: P7S-14P
• Description: SOCKET PC MNT FOR G7S RELAY
• Manufacturer: Omron
• Series: G7Sr
• Type: Socketr

Specifications of P7S-14P

• Mounting Type: Through Hole
• Number Of Positions: 14
• Termination Style: PC Pin
• Current Rating: 6A
• Terminal Type: Through Hole
• No. Of Pins: 14
• Svhc: No SVHC (15-Dec-2010)
• Accessory Type: Socket
• External Depth: 47mm
• External Length / Height: 80.5mm
• External: RoHS Compliant
• Associated Relay Series: G7S
• Mounting Style: Through Hole
• Width: 23 mm
• Socket Mounting: Through Hole
• Socket Terminals: Quick Connect
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: G7S Series
• For Use With: Z2362 - RELAY SAFETY 6A 24VDC PLUG-INZ2363 - RELAY SAFETY 6A 24VDC PLUG-IN
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: P7S14P; Z2418

Safety Precautions
Refer to the “Precautions for All Relays” and “Precautions for All Relays with Forcibly Guided Contacts”.
■ Precautions for Correct Use
Wiring
• Use one of the following wires to connect to the P7S-14F-END.
• Tighten each screw of the P7S-14F-END to a torque of
• Refer to the internal connections diagram of the G9S Safety Relay
• Wire the terminals correctly with no mistakes in coil polarity,
Cleaning
The G7S is not of enclosed construction. Therefore, do not wash the
G7S with water or detergent.
Cat. No. J107-E1-05
Stranded wire: 0.75 to 1.5 mm
Solid wire:
approximately 0.98 N·m.
Unit for an application example of the G7S.
otherwise the G7S will not operate.
1.0 to 1.5 mm
http://www.ia.omron.com/
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
2
2
In the interest of product improvement, specifications are subject to change without notice.
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
G7S
5