H3RN-11 AC24 Omron, H3RN-11 AC24 Datasheet - Page 2

• Manufacturer Part Number: H3RN-11 AC24
• Description: RELAY TIMER 10HRS 4MODE 24VAC
• Manufacturer: Omron
• Series: H3RNr

Specifications of H3RN-11 AC24

• Relay Type: Integrated
• Function: Programmable (Multi-Function)
• Circuit: SPDT (1 Form C)
• Delay Time: 0.1 Min ~ 10 Hrs
• Output Type: Mechanical Relay
• Contact Rating @ Voltage: 3A @ 250VAC
• Voltage - Supply: 24VAC
• Mounting Type: Socket
• Termination Style: Socketable
• Timing Adjustment Method: DIP Switches
• Timing Initiate Method: Input Voltage
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: H3RN-11-AC24; H3RN11AC24; Z2399

Specifications
■ Ratings
Note: 1. When using the H3RN in any place where the ambient temperature is more than 50°C, supply 90% to 110% of the rated voltages
■ Characteristics
Time ranges
Rated supply voltage (See note 2.)
Pin type
Operating mode
Operating voltage range
Reset voltage
Power consumption
Control outputs
Accuracy of operating time
Setting error
Reset time
Influence of voltage
Influence of temperature
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Ambient temperature
Ambient humidity
Life expectancy
Impulse withstand voltage
Noise immunity
Static immunity
Degree of protection
Weight
EMC
Approved standards
2. Refer to Safety Precautions for All Times when combining the Timer with an AC 2-wire proximity sensor.
(12 VDC: 95% to 110% of the rated voltage).
Item
Item
http://www.ia.omron.com/
0.1 s to 10 min (1 s, 10 s, 1 min, or 10 min max.
selectable)
24 VAC (50/60 Hz); 12, 24 VDC
Plug-in
ON-delay, interval, flicker OFF-start, or flicker-ON start selectable by DIP switch
85% to 110% of rated supply voltage (12 VDC: 90% to 110% of rated supply voltage)
(See note 1.)
10% max. of rated supply voltage
24 VAC: Relay ON: approx. 0.8 VA (0.6 W) at 24 VAC, 60 Hz
12 VDC: Relay ON: approx. 0.5 W at 12 VDC
24 VDC: Relay ON: approx. 0.6 W at 24 VDC
3 A at 250 VAC, resistive load (cosφ = 1) (G6B-2@14P-FD-US used)
The minimum applicable load is 10 mA at 5 VDC (P reference value).
±1% FS max. (1 s range: ±1%±10 ms max.)
±15%±50 ms FS max.
Min. power-opening time: 12, 24 VDC: 0.1 s max. (including halfway reset)
±2% FS max.
±2% FS max.
100 MΩ min. (at 500 VDC)
2,000 VAC, 50/60 Hz for 1 min (between operating circuit and control output, or contacts of different
poles)
1,000 VAC, 50/60 Hz for 1 min (between non-continuous contacts)
Destruction: 10 to 55 Hz, 0.75-mm single amplitude for 1 h each in 3 directions
Malfunction: 10 to 55 Hz, 0.5-mm single amplitude for 10 min each in 3 directions
Destruction: 300 m/s
Malfunction: 100 m/s
Operating:
Storage:
Operating:
Mechanical: 10,000,000 operations min. (under no load at 1,800 operations/h)
Electrical:
Between power terminals: 1 kV
±1.5 kV, square-wave noise by noise simulator (pulse width: 100 ns/1 μs, 1-ns rise)
Destruction: 8 kV
Malfunction: 4 kV
IP40 (Terminal screw sections are excluded.)
Approx. 18 g
(EMI)
Emission Enclosure:
Emission AC Mains:
(EMS)
Immunity ESD:
Immunity RF-interference from AM Radio Waves: IEC61000-4-3:10 V/m (80 MHz to 1 GHz) (level 3)
Immunity Burst:
Immunity Surge:
UL508, CSA C22.2 No. 14
Conforms to EN61812-1, IEC60664-1 4 kV/2.
Output category according to IEC60947-5-1.
Relay OFF: approx. 0.6 VA (0.4 W) at 24 VAC, 60 Hz
Relay OFF: approx. 0.2 W at 12 VDC
Relay OFF: approx. 0.3 W at 24 VDC
−10°C to 55°C (with no icing)
−25°C to 65°C (with no icing)
35% to 85%
100,000 operations min. (3 A at 250 VAC, resistive load at 1,800 operations/h)
H3RN-1/H3RN-2
H3RN-1/H3RN-2
2
2
24 VAC:
EN61812-1
EN55011 Group 1 class A
EN55011 Group 1 class A
EN61812-1
EN61000-4-2: 6 kV contact discharge (level 3)
EN61000-4-4: 2 kV power-line (level 3)
IEC51000-4-5: 1 kV line to line (level 3)
0.5 s max. (including halfway reset)
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
8 kV air discharge (level 3)
2 kV I/O signal-line (level 4)
2 kV line to ground (level 3)
0.1 min to 10 h (1 min, 10 min, 1 h, or 10 hrs max.
selectable)
H3RN-11/H3RN-21
H3RN-11/H3RN-21
H3RN
2