I800 Fluke Electronics, I800 Datasheet - Page 2

• Manufacturer Part Number: I800
• Description: CURRENT CLAMP PROBE AC
• Manufacturer: Fluke Electronics
• Type: AC Clampr

Specifications of I800

• Style: Pincer
• Ac Current Range: 100mA ~ 800A rms
• Bandwidth: 10kHz
• Cable Length: 62.992" (1600.00mm)
• Max Conductor Size: 2.126" (54.00mm)
• Termination: Banana Plug, Double, Sheathed
• Ratings: CAT III 600V
• For Use With: 614-1062 - DMM TRUE RMS 50000CNT W/BCKLGHT
• Lead Free Status / RoHS Status: Lead free by exemption / RoHS compliant by exemption
• Other names: 2840283

Safety Instructions
Please read this section carefully. It will make you familiar with
the most important safety instructions for handling the Clamp. In
this instruction sheet, a Warning identifies conditions and actions
that pose hazard(s) to the user. A Caution identifies conditions
and actions that may damage the Clamp or the test instruments.
The Clamp may only be used and handled by
qualified personnel. To avoid electric shock or
personal injury, follow these precautions:
•
•
•
•
•
•
•
•
•
•
Do not use the Clamp if damaged. Always
connect to display device before it is installed
around the conductor.
If the Clamp is not used as specified by the
manual, protection provided by the Clamp may
be impaired.
Do not clamp around a conductor before
connecting current to the measuring
equipment.
Do not disconnect the output from the
measuring equipment while the Clamp is still
around a conductor.
Connect the Clamp output to measuring
equipment having safety receptacles.
Do not use prior to consulting local and
national safety codes and use of protective
equipment is recommended.
Do not hold the Clamp beyond the tactile
barrier.
Before each use, inspect the Clamp. Look for
cracks or missing portions of the housing or
output cable insulation. Also look for loose or
weakened components. Pay particular attention
to the insulation surrounding the jaws. Open
and close the Clamp, noting detent action
indicating proper mechanical operation of
SIAC
Use caution when working with voltages above
60 V dc, 30 V ac rms or 42 V ac peak. Such
voltages pose a shock hazard.
Do not use Clamp in wet environments or in
locations that hazardous gases exist.
TM
anti short circuit feature.
WX
Warning