543382-7 Tyco Electronics, 543382-7 Datasheet - Page 2
![INSERT/EXTRACT TIP 25-KIT](/photos/9/95/99533/543382-7_sml.jpg)
543382-7
Manufacturer Part Number
543382-7
Description
INSERT/EXTRACT TIP 25-KIT
Manufacturer
Tyco Electronics
Series
AMPLIMITE®r
Type
Insertion / Extraction Toolsr
Specifications of 543382-7
Tool Type
Insertion/Extraction Tool Tip
Product
Insertion Tool
For Use With
Posted HD20 Contacts
Lead Free Status / RoHS Status
Not applicable / Not applicable
For Use With/related Products
D-Sub Terminals
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
3. TOOL ASSEMBLY
Refer to Figure 1 and select the appropriate contact,
wire size, and insertion/extraction tip. Proceed as
follows:
Rev B
Insertion/Extraction Tip
1. Insert plug into the widest end of the insertion/
extraction tip.
2. Slide the insertion/extraction tip into the end of
the tool handle with the orientation latch positioned
toward the bottom of the tool.
Contact Cavity
Plug
(Figure 2)
Insertion Tip
Wire Slot
(Ref)
Setscrew (Ref)
Back of Receptacle
Connector 205439-1
Wire Slot
Butt Tool Tip Against
Contact Shoulder
Figure 2
Figure 3
4. INSERTION/EXTRACTION PROCEDURES
4.1. Inserting A Wire Crimped Contact
Bottom of Tool
(Ref)
Insertion Handle
3. Using the hex wrench, tighten the setscrew to
secure the tip in the tool handle.
1. Position tool handle between thumb and
fingertips, then place wire over the wire slot of the
tip. Hold wire in this position with your thumb.
Insertion/Extraction
Handle
(Figure 3)
Wire
408-9404
2 of 6