91293-1 Tyco Electronics, 91293-1 Datasheet - Page 2
![no-image](/images/manufacturer_photos/0/6/687/tyco_electronics_sml.jpg)
91293-1
Manufacturer Part Number
91293-1
Description
CONN COVERS LACING TERMINATION
Manufacturer
Tyco Electronics
Series
AMPMODU®r
Datasheet
1.91293-1.pdf
(4 pages)
Specifications of 91293-1
Tool Type
Cover Lacing Fixture
For Use With/related Products
Amplimite® 0.050 Series Connectors
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
3. TOOLING ASSEMBLY SETUP
2
Cover Lacing Fixture 91293-1
of 4
1. Place the slide body onto the base of the arbor
frame, and align the screw holes in the bottom of
the slide body with the holes in the base. Refer to
Figure 2.
2. While holding the slide body in place, tilt the
arbor frame and insert, but do not tighten, the four
mounting screws.
3. Remove the tool mount from the ram of the
arbor frame assembly, if assembled.
4. Install the proper seating bars for the application
as shown in Figure 3.
NOTE
5. Place the upper tooling assembly and tool
mount onto the ram, and tighten the flat head
screws. Refer to Figure 4.
6. Align the slide stop with the appropriate pair of
mounting holes in the slide body, and insert and
tighten the two mounting screws. Refer to Figure 5.
NOTE
7. Place the lacing fixture subassembly onto the
slide body as shown in Figure 5.
8. Slide the lacing fixture subassembly back
against the slide stop.
Slide Body
i
i
Mounting
Screws
Be sure to locate the tabs on the seating bars
toward the BACK of the arbor frame assembly.
The forward-most mounting holes in the slide are
for 26- and 50-position termination covers, and
the rear-most holes are for 68- and 100-position
termination covers.
Figure 2
Arbor Frame
Base (Ref)
Tyco Electronics Corporation
Orientation of 68-Position
Seating Bars
Center
Slots
Upper Tooling
Assembly
Cutting
Blade
Slide Stop Position for 26- and
50-Position Connectors and
Termination Covers
Lacing Fixture
Subassembly
Socket Head Cap
Screws
Slide Stop Position for 68- and
100-Position Connectors and
Termination Covers
Figure 3
Figure 4
Figure 5
Arbor Frame
Ram (Ref)
Orientation of 26-Position
Seating Bars
Toward Back of Arbor
Frame Assembly
Tool Mount
Slide Body
Flat Head
Screw
(2 Places)
408-9750
Rev
C