B45396R0108K509V10 Kemet, B45396R0108K509V10 Datasheet - Page 11
![CAP TANT 1000UF 4V 10% LOESR SMD](/photos/1/8/10834/t510_series_7_3l_4_3w_sml.jpg)
B45396R0108K509V10
Manufacturer Part Number
B45396R0108K509V10
Description
CAP TANT 1000UF 4V 10% LOESR SMD
Manufacturer
Kemet
Series
B45396Rr
Type
Moldedr
Datasheet
1.B45396R1477K509V10.pdf
(12 pages)
Specifications of B45396R0108K509V10
Capacitance
1000µF
Voltage - Rated
4V
Tolerance
±10%
Esr (equivalent Series Resistance)
30.0 mOhm
Operating Temperature
-55°C ~ 125°C
Mounting Type
Surface Mount
Package / Case
2917 (7343 Metric)
Size / Dimension
0.287" L x 0.169" W (7.30mm x 4.30mm)
Height
0.161" (4.10mm)
Manufacturer Size Code
E
Features
General Purpose
Voltage Rating
4 Volts
Esr
30 mOhms
Operating Temperature Range
- 55 C to + 125 C
Dimensions
4.3 mm W x 7.3 mm L x 4.1 mm H
Dissipation Factor Df
6
Leakage Current
40 uA
Product
Tantalum Solid Low ESR Standard Grade
Termination Style
SMD/SMT
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Spacing
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
495-1607-2
B45396R0108K509
B45396R0108K509
Low-resistance applications and voltage networks
For low-resistance applications, KEMET recommends a maximum operating voltage of half the
permissible maximum continuous voltage, so that the capacitors have sufficient tolerance to
withstand voltage peaks. Depending on the conditions of use, the early failure rate is higher here
by a factor of 2 to 20 than in the range with a constant failure rate as specified in the data book.
When operated directly in a voltage network, the capacitor should be protected against
overvoltage, e.g. by a suppressor diode, and against polarity reversal by a diode. If a capacitor is
operated in an unprotected low-impedance circuit and fails because the permissible conditions for
the forward DC voltage, reverse DC voltage, surge current, power dissipation or temperature are
exceeded, the continued current flow through the overstressed capacitor may produce
overheating. The overheated capacitor may damage the surrounding components and the circuit
board.
Storage conditions
Capacitors with solid electrolyte may be stored at temperatures down to –80 C. The upper
storage temperature must not exceed +85 C (for blister tape the temperature limit is +40 C).
The storage conditions should not exceed +40 C and 70% R. H. A drypack is useful to prevent
the effects of humidity.
Please read Important notes and
Cautions and warnings at the end of this document.
Tantalum chip capacitors
Multiple Anode, Ultra-low ESR
Page 11 of 12
B45396R