C2012X5R0J106M TDK Corporation, C2012X5R0J106M Datasheet - Page 56

• Manufacturer Part Number: C2012X5R0J106M
• Description: CAP CER 10UF 6.3V X5R 20% 0805
• Manufacturer: TDK Corporation
• Series: Cr

Specifications of C2012X5R0J106M

• Capacitance: 10µF
• Package / Case: 0805 (2012 Metric)
• Voltage - Rated: 6.3V
• Tolerance: ±20%
• Temperature Coefficient: X5R
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 85°C
• Features: Low ESR
• Applications: General Purpose
• Size / Dimension: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Thickness: 1.25mm
• Tolerance (+ Or -): 20%
• Voltage: 6.3VDC
• Temp Coeff (dielectric): X5R
• Operating Temp Range: -55C to 85C
• Mounting Style: Surface Mount
• Construction: SMT Chip
• Case Style: Ceramic Chip
• Failure Rate: Not Required
• Wire Form: Not Required
• Product Length (mm): 2mm
• Product Depth (mm): 1.25mm
• Product Height (mm): 1.25mm
• Product Diameter (mm): Not Requiredmm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ratings: -
• Lead Spacing: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 445-1363-2; C2012X5R0J106M; C2012X5R0J106MT; C2012X5R0J106MT

• All specifications are subject to change without notice. Please read the precautions before using the product.
US Catalog // C Series — General Application // Version A11
No.
15
General
Specifications
Item
Moisture Resistance (Steady State)
External
appearance
Capacitance
Q
(Class 1)
D.F.
(Class 2)
Insulation
Resistance
Performance
No mechanical damage.
Characteristics
X5R: 200% of initial spec. max.
X7R: 200% of initial spec. max
Y5V: 150% of initial spec. max
1,000MΩ or 50MΩ•μF min.
(As for the capacitors of rated voltage
16, 10 and 6.3V DC, 1,000 MΩ or
10MΩ•μF min.,) whichever smaller.
Characteristics
Class 1
Class 2
Rated
Capacitance
C ≥ 30pF
10pF ≤ C < 30pF
C <10pF
C0G
X5R
X7R
Y5V
C : Rated capacitance (pF)
Change from the
value before test
±5% or ±0.5pF,
whichever larger.
± 25 %
± 25 %
± 30 %
Q
350 min.
275+5/2×C min.
200+10×C min.
C Series — General Application
Test or Inspection Method
Reflow solder the capacitor on P.C. board (shown in
Appendix 1a or Appendix 1b) before testing.
Leave at temperature 40±2ºC, 90 to 95%RH for 500
+24,0h.
Leave the capacitor in ambient conditions for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.