GA342D1XGF150JY02L Murata Electronics North America, GA342D1XGF150JY02L Datasheet - Page 53

• Manufacturer Part Number: GA342D1XGF150JY02L
• Description: CAP CER 250VAC 15PF 5% SL 1808
• Manufacturer: Murata Electronics North America
• Series: GFr

Specifications of GA342D1XGF150JY02L

• Capacitance: 15pF
• Voltage - Rated: 250VAC
• Tolerance: ±5%
• Temperature Coefficient: SL
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: 20°C ~ 85°C
• Features: High Voltage
• Applications: Safety
• Ratings: X1Y2
• Package / Case: 1808 (4520 Metric)
• Size / Dimension: 0.177" L x 0.079" W (4.50mm x 2.00mm)
• Thickness: 2.00mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Spacing: -
• Other names: 490-3461-2

!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
No.
GRM Series Specifications and Test Methods (1) (Note 1)-Typical Inspection
1
2
3
4
5
6
7
8
Operating
Temperature
Range
Rated Voltage
Appearance
Dimensions
Dielectric Strength
Insulation
Resistance
Capacitance
Q/
Dissipation Factor
(D.F.)
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GRM Series Specifications and Test Methods (1) (Note 1)-Typical Inspection
Item
–55 to +125 C
(2P/R/S/T, 3P/R/S/T/U,
4P/R/S/T/U: –25 to +85 C)
See the previous pages.
No defects or abnormalities
Within the specified dimensions
No defects or abnormalities
CV0.047 F: More than 10,000M
CG0.047 F: More than 500 · F
Within the specified tolerance
30pF and over: QU1000
30pF and below:
C: Nominal Capacitance (pF)
Compensating Type
Temperature
QU400+20C
When no "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (1).
Specifications
When "*" is added in PNs table, please refer to GRM Series Specifications and Test Methods (2).
B1, B3, F1: –25 to +85 C
R1, R7: –55 to +125 C
R6: –55 to +85 C
C8: –55 to +105 C
E4: +10 to +85 C
F5: –30 to +85 C
[R6, R7, C8]
W.V.: 100V
W.V.: 50/35/25V:
*GRM32D R7/R6/C8 1E106: 0.035 max.
W.V.: 16/10V: 0.035 max.
W.V.: 6.3/4V
[E4]
W.V.: 25Vmin: 0.025 max.
[F1, F5]
W.V.: 25V min.
W.V.: 16/10V: 0.125 max.
W.V.: 6.3V: 0.15 max.
Please refer to individual specifications (our product specifications or the approval sheet).
High Dielectric Type
: 0.025 max. (CF0.068 F)
: 0.05 max. (CU0.068 F)
: 0.025 max.*
: 0.05 max. (CF3.3 F)
: 0.1 max. (CU3.3 F)
: 0.05 max. (CF0.1 F)
: 0.09 max. (CU0.1 F)
C: Nominal Capacitance
(Note 1) These Specifications and Test Methods indicate typical inspection.
Reference temperature: 25 C
(2 , 3 , 4 , B1, B3, F1, R1: 20 C)
The rated voltage is defined as the maximum voltage that may
be applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, V
whichever is larger, should be maintained within the rated
voltage range.
Visual inspection
Using calipers (GRM02 size is based on Microscope)
No failure should be observed when 300%* of the rated voltage
(temperature compensating type) or 250% of the rated voltage
(high dielectric constant type) is applied between the
terminations for 1 to 5 seconds, provided the charge/discharge
current is less than 50mA.
The insulation resistance should be measured with a DC
voltage not exceeding the rated voltage at 20/25 C and 75%RH
max. and within 2 minutes of charging, provided the charge/
discharge current is less than 50mA.
The capacitance/Q/D.F. should be measured at 20/25 C at the
frequency and voltage shown in the table.
Item
Frequency
Voltage
Char.
(1000pF and
0.5 to 5Vrms
to 7U, 1X
1 0.1MHz
below)
C
Test Method
F5, B1, B3, F1
(more than
C to 7U, 1X
R6, R7, C8,
1 0.2Vrms
1000pF)
1 0.1kHz
*200% for 500V
Continued on the following page.
R6, R7, F5
120 24kHz
(C>10 F)
0.1Vrms
0.5
1 0.1kHz
0.05Vrms
P-P
0.5
E4
or V
O-P
51
C02E.pdf
,
10.12.20