PT06E-12-8P(SR) Amphenol Industrial Operations, PT06E-12-8P(SR) Datasheet - Page 63

• Manufacturer Part Number: PT06E-12-8P(SR)
• Description: CONN PLUG 8POS W/PINS SOLDER
• Manufacturer: Amphenol Industrial Operations
• Series: MIL-DTL-26482 Series I, PTr
• Type: Cable Plugr

Specifications of PT06E-12-8P(SR)

• Connector Type: Plug, Male Pins
• Number Of Positions: 8
• Shell Size - Insert: 12-8
• Mounting Type: Free Hanging (In-Line)
• Termination: Solder Cup
• Fastening Type: Bayonet Lock
• Orientation: N (Normal)
• Ingress Protection: Environment Resistant
• Shell Material, Finish: Aluminum, Olive Drab Cadmium Plated
• Features: Strain Relief
• Agency Approvals: UL Recognized
• Angle: Straight
• Application: Commercial
• Brand/series: PT Series
• Class: E
• Contact Configuration: 8#20
• Contact Plating: Gold
• Contact Type: Pin
• Current, Rating: 7.5 A
• Finish, Housing: Olive Drab Cadmium
• Housing Type: Metal
• Insert Arrangement: 12-8
• Material, Dielectric: Neoprene
• Material, Housing: Aluminum
• Mating Type: Bayonet
• Number Of Contacts: 8
• Primary Type: 26482 Commercial
• Shell Size: 12
• Special Features: 5 Key/Keyway Polarization
• Strain Relief: External
• Voltage, Rating: 600 VAC
• Wire, Awg: 20
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Shell Size, Military: -
• Other names: PT06E12-8P(SR)

PC
how to order
PC
To more easily illustrate ordering procedure, part number
PC00A-20-41PW (SR) is shown as follows:
See code below:
1. Connector Type
2. Shell Style
3. Service Class
4. Shell Size
5. Insert Arrangement
6. Contacts
7. Insert Rotation
8. “(SR)” designates strain relief clamp.
* Hermetic connectors are supplied with tin plated shells.
† This connector style is sometimes referred to as a cable connecting “plug”.
PC
1
It does, however, mate with either a straight or 90 degree plug.
“PC” designates bright cadmium plated with clear chromate after treat-
ment, threaded coupling connector with solder contacts
“00”
“01”
“02”
“06”
“07”
“
“A”
“C”
“E”
“P”
“W”
“H”
“Y”
“20”
Refer to pages 4-11 for insert availability.
“20 – 41” designates insert arrangement. (The number following the
hyphen is the number only that is used in the part number).
“P”
“S”
Refer to page 7.
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from the “nor-
mal” position. No letter required for normal (no rotation) position.
Indicate optional finishes as follows:
(001)
(003)
(005)
(011)
(014)
(023)
I
”
00
2
designates wall mounting receptacle
designates cable connecting receptacle
designates box mounting receptacle
designates straight plug
designates jam nut receptacle
designates solder-mount receptacle (hermetic only)
designates general duty back shell
designates pressurized receptacle
designates environmental resisting open wire seal with
grommet and nut
designates potted with potting boot
designates clamp assembly for moisture proofing, multi-
jacketed cables
designates hermetic* seal (without interfacial seal)
designates hermetic* seal (with interfacial seal)
designates shell size. Shell sizes 6 through 24 available.
designates pin contacts.
designates socket contacts.
bright cadmium (standard on “PC”)
olive drab cadmium plate
anodic coating - Alumilite
chromate treated (Iridite 14-2)
olive drab cadmium plate over nickel
electroless nickel
A – 20 – 41
3
4
5
P
6
®
W
7
(SR)
8
†
61