PIC12CE519-04I/SM Microchip Technology, PIC12CE519-04I/SM Datasheet - Page 187

• Manufacturer Part Number: PIC12CE519-04I/SM
• Description: IC MCU OTP 1KX12 W/EE 8-SOIJ
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12CE519-04I/SM

• Core Size: 8-Bit
• Program Memory Size: 1.5KB (1K x 12)
• Core Processor: PIC
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Type: OTP
• Eeprom Size: 16 x 8
• Ram Size: 41 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-SOIC (5.3mm Width), 8-SOP, 8-SOEIAJ
• Controller Family/series: PIC12
• No. Of I/o's: 6
• Eeprom Memory Size: 16Byte
• Ram Memory Size: 41Byte
• Cpu Speed: 4MHz
• No. Of Timers: 1
• Processor Series: PIC12C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 41 B
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 8
• Operating Supply Voltage: 3 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT08SO-1 - SOCKET TRANSITION 8SOIC 150/208AC164312 - MODULE SKT FOR PM3 16SOICISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMING309-1048 - ADAPTER 8-SOIC TO 8-DIP309-1047 - ADAPTER 8-SOIC TO 8-DIPAC124001 - MODULE SKT PROMATEII 8DIP/SOIC
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

12.6
1997 Microchip Technology Inc.
Timer1 Oscillator
A crystal oscillator circuit is built in between pins T1OSI (input) and T1OSO (amplifier output). It
is enabled by setting the T1OSCEN control bit (T1CON<3>). The oscillator is a low power
oscillator, rated up to 200 kHz operation. It will continue to run during SLEEP. It is primarily
intended for a 32 kHz crystal, which is an ideal frequency for real-time keeping.
the capacitor selection for the Timer1 oscillator.
The Timer1 oscillator is identical to the LP oscillator. The user must provide a software time delay
to ensure proper oscillator start-up.
Table 12-1: Capacitor Selection for the Timer1 Oscillator
Crystals Tested:
32.768 kHz
100 kHz
200 kHz
Note 1: Higher capacitance increases the stability of oscillator but also increases the start-up
Note:
2: Since each resonator/crystal has its own characteristics, the user should consult the
Osc Type
time.
resonator/crystal manufacturer for appropriate values of external components.
LP
This allows the counter to operate (increment) when the device is in sleep mode,
which allows Timer1 to be used as a real-time clock.
Epson C-001R32.768K-A
Epson C-2 100.00 KC-P
STD XTL 200.000 kHz
100 kHz
200 kHz
32 kHz
Freq
Section 12. Timer1
33 pF
15 pF
15 pF
C1
DS31012A-page 12-7
20 PPM
20 PPM
20 PPM
Table 12-1
33 pF
15 pF
15 pF
C2
shows
12