PIC18LF13K22-I/SO Microchip Technology, PIC18LF13K22-I/SO Datasheet - Page 19

• Manufacturer Part Number: PIC18LF13K22-I/SO
• Description: IC PIC MCU FLASH 256KX8 20-SOIC
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF13K22-I/SO

• Program Memory Type: FLASH
• Program Memory Size: 8KB (4K x 16)
• Package / Case: 20-SOIC (7.5mm Width)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 64MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 17
• Eeprom Size: 256 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: I2C, MSSP, SPI, USART
• Maximum Clock Frequency: 32 KHz
• Number Of Programmable I/os: 18
• Number Of Timers: 4
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

2.6
The internal oscillator module contains two independent
oscillators which are:
• LFINTOSC: Low-Frequency Internal Oscillator
• HFINTOSC: High-Frequency Internal Oscillator
When operating with either oscillator, OSC1 will be an
I/O and OSC2 will be either an I/O or CLKOUT. The
CLKOUT function is selected by the FOSC bits of the
CONFIG1H Configuration register. When OSC2 is
configured as CLKOUT, the frequency at the pin is the
frequency of the Internal Oscillator divided by 4.
2.6.1
The Low-Frequency Internal Oscillator (LFINTOSC) is
a 31 kHz internal clock source. The LFINTOSC
oscillator is the clock source for:
• Power-up Timer
• Watchdog Timer
• Fail-Safe Clock Monitor
The LFINTOSC is enabled when any of the following
conditions are true:
• Power-up Timer is enabled (PWRTEN = 0)
• Watchdog Timer is enabled (WDTEN = 1)
• Watchdog Timer is enabled by software
• Fail-Safe Clock Monitor is enabled (FCMEM = 1)
• SCS1 = 1 and IRCF<2:0> = 000 and INTSRC = 0
• FOSC<3:0> selects the internal oscillator as the
• IESO = 1 (Two-Speed Start-up) and
 2010 Microchip Technology Inc.
(WDTEN = 0 and SWDTEN = 1)
primary clock and IRCF<2:0> = 000 and
INTSRC = 0
IRCF<2:0> = 000 and INTSRC = 0
Internal Oscillator
LFINTOSC
Preliminary
PIC18F1XK22/LF1XK22
2.6.2
The High-Frequency Internal Oscillator (HFINTOSC) is
a precision oscillator that is factory-calibrated to
operate at 16 MHz. The output of the HFINTOSC
connects to a postscaler and a multiplexer (see
Figure 2-1). One of eight frequencies can be selected
using the IRCF<2:0> bits of the OSCCON register. The
following
HFINTOSC:
• 16 MHZ
• 8 MHZ
• 4 MHZ
• 2 MHZ
• 1 MHZ (Default after Reset)
• 500 kHz
• 250 kHz
• 31 kHz
The HFIOFS bit of the OSCCON register indicates
whether the HFINTOSC is stable.
The HFINTOSC is enabled if any of the following
conditions are true:
• SCS1 = 1 and IRCF<2:0>  000
• SCS1 = 1 and IRCF<2:0> = 000 and INTSRC = 1
• FOSC<3:0> selects the internal oscillator as the
• IESO = 1 (Two-Speed Start-up) and
• FCMEM = 1 (Fail-Safe Clock Monitoring) and
primary clock and
Note 1: Selecting 31 kHz from the HFINTOSC
- IRCF<2:0>  000 or
- IRCF<2:0> = 000 and INTSRC = 1
- IRCF<2:0>  000 or
- IRCF<2:0> = 000 and INTSRC = 1
- IRCF<2:0>  000 or
- IRCF<2:0> = 000 and INTSRC = 1
2: Additional adjustments to the frequency
frequencies
HFINTOSC
oscillator requires IRCF<2:0> = 000 and
the INTSRC bit of the OSCTUNE register
to be set. If the INTSRC bit is clear, the
system
LFINTOSC.
of the HFINTOSC can made via the
OSCTUNE registers. See Register 2-3
for more details.
clock
are
will
available
come
DS41365D-page 19
from
from
the
the