PIC12C671-04/SM Microchip Technology, PIC12C671-04/SM Datasheet - Page 146

• Manufacturer Part Number: PIC12C671-04/SM
• Description: IC MCU OTP 1KX14 A/D 8-SOIJ
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C671-04/SM

• Core Size: 8-Bit
• Program Memory Size: 1.75KB (1K x 14)
• Core Processor: PIC
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 8-SOIC (5.3mm Width), 8-SOP, 8-SOEIAJ
• Controller Family/series: PIC12
• No. Of I/o's: 6
• Ram Memory Size: 128Byte
• Cpu Speed: 4MHz
• No. Of Timers: 1
• Digital Ic Case Style: SOIC
• Processor Series: PIC12C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 1
• Operating Supply Voltage: 3 V to 5.5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: 0 C
• On-chip Adc: 8 bit, 4 Channel
• Package: 8SOIJ
• Device Core: PIC
• Family Name: PIC12
• Maximum Speed: 4 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164312 - MODULE SKT FOR PM3 16SOICISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMING309-1048 - ADAPTER 8-SOIC TO 8-DIP309-1047 - ADAPTER 8-SOIC TO 8-DIPAC124001 - MODULE SKT PROMATEII 8DIP/SOIC
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

PICmicro MID-RANGE MCU FAMILY
9.3
DS31009A-page 9-6
PORTB and the TRISB Register
PORTB is an 8-bit wide bi-directional port. The corresponding data direction register is TRISB.
Setting a bit in the TRISB register puts the corresponding output driver in a high-impedance input
mode. Clearing a bit in the TRISB register puts the contents of the output latch on the selected
pin(s).
Example 9-2:
Each of the PORTB pins has a weak internal pull-up. A single control bit can turn on all the
pull-ups. This is performed by clearing bit RBPU (OPTION<7>). The weak pull-up is automati-
cally turned off when the port pin is configured as an output. The pull-ups are disabled on a
Power-on Reset.
Figure 9-4: Block Diagram of RB3:RB0 Pins
CLRF
CLRF
BSF
MOVLW
MOVWF
Note 1: I/O pins have diode protection to V
STATUS
PORTB
STATUS, RP0
0xCF
TRISB
Initializing PORTB
2: To enable weak pull-ups, set the appropriate TRIS bit(s) and clear
the RBPU bit (OPTION<7>).
Data bus
WR TRIS
WR Port
To Peripheral Module
RBPU
(2)
; Bank0
; Initialize PORTB by clearing output
;
; Select Bank1
; Value used to initialize data direction
; PORTB<3:0> = inputs, PORTB<5:4> = outputs
;
data latches
PORTB<7:6> = inputs
RD TRIS
RD Port
TRIS Latch
Data Latch
D
D
CK
CK
Schmitt Trigger
Buffer
DD
Q
Q
and V
SS
.
Q
1997 Microchip Technology Inc.
EN
TTL
Input
Buffer
D
V
P
RD Port
DD
weak
pull-up
I/O
pin
(1)